Launch X431 V 8inch Tablet Wifi/Bluetooth Full System Diagnostic Tool
Avis: Pas d’IP limité, pas besoin d’activation maintenant. Utilisez-le directement.
Advantages:
1. Launch X431 V Two Years Free Update Online
4. Dealer Code:755D
FAQ:
Launch X431 V 8inch Tablet Wifi/Bluetooth Full System Diagnostic Tool
Avis: Pas d’IP limité, pas besoin d’activation maintenant. Utilisez-le directement.
Advantages:
1. Launch X431 V Two Years Free Update Online
FAQ:
Original Xhorse VVDI2 Commander Key Programmer Full Version for VW/AUDI/BWM/Porsche V4.0.0 ,how to install ?Here is a how to guide
of vvdi 2 version 4.0.0 installation
You need a laptop with working system:Windows XP(better)
First,donwload VVDI software 4.0.0 on Mega
https://mega.nz/#!ao4nBC7B!ypRO_riMsCLNFnxI5Ut4c-JiH5NljHFr1JiSyjbe1zg
Then install vvdi2 v4.0.0
1. Run VVDI2 installer v4.0.0 exe to install
2. Select a setup language
Option: Chinese and English
3. Click on Next to continue
4. Click on Install
5.Install VVDI2 V4.0.0 successfully
6.Run VVDI2 Quick Start to check if it’s working
This is version 4.0.0. The new VVDI 2 software can work
Go to Update Online
V4.0.0 vvdi2 update information available here:
Software Version:
VVDI2 VAG V4.0.0
VVDI2 BWM V4.0.0
VVDI2 Porsche V4.0.0
VVDI2 PSA V4.0.0
Passthru J2534 V4.0.0
Online Update Tool V4.0.0
Quick Start V4.0.0
You can find the detail update information from Readme in newest software,Mainly include:
1.BCM2 Dump Tool:
(1).Support data read by VVDI PROG
(2).Support generate BCM2 immodata,it can use to make new key,learn key
(3).Checksum fix for 95320 EEPROM dump
2.Fixbug for old A6/Q7 J518 read EEPROM bug
3.Improvement for read CAS1,CAS2 EEPROM with CAS PLUG
4.Bugfix for immobilizer data tool
Here provide WiTech MicroPod 2 V17.03.01 software download link and frequently asked questions.
wiTech MicroPod 2 V17.03.01 download free: http://pan.baidu.com/s/1crKjF4, password: 5uka
It is definitely safe to download and use, it has been tested working fine by http://www.eobdii.fr/engineers, please feel free to use it.
Compatible MicroPod 2 interface:
Best Quality OEM Multi-language wiTech MicroPod 2 Diagnostic Programming Tool (Item No. SP271-B), only this one ok to run with the above WiTech V17.03.01, otherwise the other interface won’t work.
MicroPod 2 V17.03.01 is compatible with all available MicroPod 2 clone interfaces?
No, wiTech MicroPod 2 is available with 3 options incl. SP271, SP271-B and SP271-C, but their compatible software is individual, you can’t run the downloaded software to run with SP271 and SP271-C.
wiTech MicroPod 2 is available with online programming or offline programming?
The answer is online programming since it is packed with no database.
MicroPod 2 clone interfaces comparison: SP271 Vs SP271-B Vs SP271-C
They share the same function, but from 3 different factories.
The users are allowed to online programming without database packed in the CD.
SP271-B is the best quality.
SP271-C is the cheapest.
SP271 is the first generation MicroPod 2 at middle price and with middle class quality.
MicroPod 2 clone interface setup:
AE Tools i7 Durabook Custom Laptop with Windows 7 32-bit operating system or higher
Screen resolution: 1920×1080 or Higher
Multi-Languages available: English, French, Spanish, German, Italian, Russian, Japanese, Korean and Chinese
MicroPod 2 V17.03.01 function and vehicle coverage:
MADE BY MOPAR (CHRYSLER) and OEM, the microPOD II is small in stature but offers 100 percent CAN coverage for Chrysler, Dodge, Jeep, and Fiat (North America), including latest 2014 Dodge Ram ProMaster, 2015 Jeep Renegade and 95% of non-CAN.
wiTECH diagnostic system is a direct replacement for wiTECH VCI POD, StarMobile, StarScan, and wi-TECH POD.
Done.
Hope it helps!
Engineer shares the steps to register obdstar x300 DP tablet as below. It is very easy to operate without difficulty.
PS: the below instruction applies for both obdstar x300 DP tablet full configuration and x300 DP tablet standard configuration.
Step 1. Connect your VCI with the main cable and the 12V power as follows:
Step2. Turn on tablet and connect with VCI.
Click “setting”—Enter “Bluetooth”—Click the Bluetooth name of VCI to connect
Step 3 x300 DP tablet Registration
Enter”DP”—Enter “Setting”—Begin to register—Fill in the registration information (user name, password, email)—Register successfully
Launch X431 Pro Mini Bluetooth wins X431 Diagun in Features, function, vehicle coverage, parameters, etc.
Launch X431 Pro Mini Bluetooth all info is shown as below.
Launch X431 Pro Mini Bluetooth high lights:
Launch X431 Pro Mini what car models work:
X-431 PRO MINI supports all electronic control systems on 12V EFI models, incl. more than 150 European, American and Asian models like Maserati, Ferrari, Rolls Royce, Bentley, Mercedes-Benz, BMW, Audi.Diagnose the electronic control system of prevailing vehicle models covering Asian, European, American and Chinese. It achieves full car model and full system vehicle trouble diagnosis.
Launch X431 Pro Mini diagnosis features:
Launch X431 Pro Mini wins diagun more in parameters:
X-431 PRO MINI Technical Parameters:
Operating system: Android 5.1
Processor :Quad core 1.3 GHz
Memory: 2GB
Storage:16GB
LCD screen: 6.9 inch with a resolution of 1280 x 720 pixels
Camera :Front-facing 2MP camera + rear-facing 5MP camera
Battery :3.7V/3000mh rechargeable polymer lithium battery
Connectivity : Wi-Fi: WLAN 802.11b/g/n ,Bluetooth: Bluetooth 4.1
Working temperature: 0℃ ~ 45℃
Storage temperature: -10℃ ~ 50℃
VCI module Parameters:
Working voltage 9 ~18V
Average working current About 85mA
Standby current About 55mA
Working temperature -10℃ ~ 55℃
Storage temperature -20℃ ~ 70℃
Relative humidity 20% ~ 90%
DBScarⅢ adapter parameters:
The brand-new DBScarⅢ adapter is small size and can be easily plugged into the handset to diagnose and matching, it tests car models stably, it supports
CAN diagnosis also USB data transfer.
Size: 69 × 40 × 18 mm
Operating voltage: 9V DC – 18V DC
Test voltage: DC12V
Typical power consumption: ≤2W
Bluetooth distance: 100 m
Connectivity: Bluetooth + wired
Operating temperature: -10℃to 50℃
Red Indicator: Turns red when connected to power supply;
blue Indicator: Turns blue then wireless Bluetooth work;
USB work: Turns green when the connector is connected to the USB cable
Launch X431 Pro Mini handset
1 VCI module
2 Reset hole
3 Rear camera
4 Camera flash
5 Slot for VCI module for housing the VCI module.
6 POWER/Screen lock key In Off mode, press it to turn X-431 PRO MINI on; In On mode, turn X-431 PRO MINI off with long press or lock screen with short press.
7 Carry strap
8 Air intake vent
9 USB/Charging port To connect to the power adaptor for charging.
10 Microphone
11 LCD screen
12 VOLUME +/- Key To adjust the volume. To print the screen, hold and press the POWER and VOLUME – key until a snapshot pops up on the screen.
The captured snapshot is saved in the “Screenshots” folder.
13 Speaker
14 Front cameras
15 Earphone Jack
Launch X431 Pro Mini package:
How to guide of 2017 Autel DS808 registration ?
– Necessary to perform Autel DS808 registration?
– Definitely yes! To get access to the Support platform and obtain update and other services from Autel, you are required to register the Autel scanner DS808 for the first time you use it.
– What you need for the maxidas ds808 registration?
1- autel scanner ds808
2- account id
3- serial number & password
– How to register autel maxidas ds808?
log in, if you already have an account.
click the Create Autel ID button on the left side.
Autel’s Terms and Conditions and tick on Agree, and then click
Create Autel ID at the bottom to continue.
the registered email address. Validate your account by clicking the
link provided through the mail. A product registration screen opens.
section of the Settings application on the Display Tablet.
number and password on the Product Registration screen, and click on
Submit to complete the registration.
The Autel DS808 diagnostics application allows you to establish a data link to the electronic control system of the test vehicle for vehicle diagnosis. You can operate functional tests, retrieve vehicle diagnostic information such as trouble codes, freeze frame data and live data for various vehicle control systems, such as engine, transmission, ABS, and more. The Vehicle Diagnostics screen has 2 main options:
After a section is selected and the tablet establishes communication with the vehicle, the corresponding function menu or selection menu displays.
Diagnosis
There are two options available when accessing the Diagnosis section:
After a section is selected and the tablet establishes communication with the vehicle, the corresponding function menu or selection menu displays.
Auto Scan
The Auto Scan function performs a comprehensive scanning over all the ECUs in the vehicle’s systems in order to locate and retrieve DTCs. The sample operation screen of Auto Scan displays as below:
Control Units
This option allows you to manually locate a required control system for testing through a series of choices. Please follow the menu driven procedures and make proper selection each time. The program will guide you to the diagnostic function menu after a few choices you’ve made.
The Function Menu options vary slightly for different vehicles. The function menu may include:
ECU Information – provides the retrieved ECU information in detail. Tap to open an information screen.
Trouble Codes – includes Read codes and Erase codes functions. Displays detailed information of DTC records retrieved from the test vehicle’s ECU and erases DTC records and other data from the test vehicle’s ECU.
Freeze Frame – displays the freeze frame data of the DCTs.
Live Data – retrieves and displays live data and parameters from the test vehicle’s ECU.
Active Test – provides specific subsystem and component tests. This selection may appear as Actuators, Actuator Test, or Function Tests, etc., and the tests options vary depending on the manufacturer and model.
NOTE
With the diagnostic toolbar on top of the screen throughout the whole diagnostic procedures, you are allowed to make various controls of the diagnostic information at any time, such as printing and saving the displayed data, getting help information, or performing data logging, etc.
How to use Autel MaxiDAS DS808 to perform a diagnostic function:
ECU Information
This function retrieves and displays the specific information for the tested control unit, including unit type, version numbers and other specifications.
The sample ECU Information screen displays as below:
Read Codes
This function retrieves and displays the DTCs from the vehicle’s control system. The Read Codes screen varies for each vehicle being tested. On some vehicles, freeze frame data can also be retrieved for viewing. The sample Read Codes screen displays as below:
Erase Codes
After reading the retrieved codes from the vehicle and certain repairs have been carried out, you can erase the codes from the vehicle using this function.
Before performing this function, make sure the vehicle’s ignition key is in the ON (RUN) position with the engine off.
How to erase codes via Autel DS808 Scanner:
Live Data
When this function is selected, the screen displays the data list for the selected module. The items available for any control module vary from one vehicle to another. The parameters display in the order that they are transmitted by the ECM, so expect variation between vehicles.
Gesture scrolling allows you to quickly move through the data list. Simply swipe the screen up or down to locate the data you want. The figure below shows a typical Live Data screen:
Display Mode
There are 4 types of display modes available for data viewing, allowing you to view various types of parameters in the most suitable way.
Tapping the drop-down button on the right side of the parameter name opens a submenu. There are 4 buttons to configure the data display mode, and one Help button on the right that you can tap for additional information.
Each parameter item displays the selected mode independently.
1) Analog Gauge Mode – displays the parameters in form of an analog meter graph.
2) Text Mode – this is the default mode which displays the parameters in texts and shows in list format.
3) Waveform Graph Mode – displays the parameters in waveform graphs. When this mode is applied, three control buttons will appear on the right side of the parameter item, allowing you to manipulate the display status.
4) Digital Gauge Mode – displays the parameters in form of a digital gauge graph.
Full Screen Display – this option is only available in the waveform graph mode and mostly used in Graph Merge status for data comparison.
There are three control buttons available on the top right side of the screen under this mode.
How to edit the waveform color and line thickness in a data graph
Setting Mode in Live Data
Active Test
The Active Test function is used to access vehicle-specific subsystem and component tests. Available tests vary depending on the manufacturer, year, and model, and only the available tests display in the menu.
During an active test, the tester outputs commands to the ECU in order to drive the actuators. This test determines the integrity of the system or parts by reading the engine ECU data, or by monitoring the operation of the actuators, such as switching a solenoid, relay, or switch between two operating states.
Selecting Active Test opens a menu of test options that varies by make and model. Selecting a menu option activates the test. Follow on-screen instructions while performing tests. The content and pattern of the on-screen information vary according to the type of test being performed. Some toggle and variable control tests display Active Test Controls at the top of the screen with data stream information below, or vice versa.
The functional buttons at the lower right corner of the Active Test screen manipulate the test signals. The operational instructions are displayed on the main section of the test screen. Simply follow the on-screen instructions and make appropriate selections to complete the tests. Each time when an operation is successfully executed, message such as “Command Finished”, “Activation Successful”, or something similar displays.
Tap the ESC functional button to exit the test when finished.
Special Functions
These functions perform various component adaptations, allowing you to recalibrate or configure certain components after making repairs or replacement.
The main menu displays the supported special functions for the test vehicle.
Follow the on-screen instructions to complete the desired function. When the operation is done, an execution status message such as Completed, Finished or Successful, displays. Tap the ESC button to exit the function.
Hot Functions
The Service section is specially designed to provide you with quick access to the vehicle systems for various scheduled service and maintenance performances. The typical service operation screen is a series of menu driven executive commands. By following the on-screen instructions to select appropriate execution options, enter correct values or data, and perform necessary actions, the system will guide you through the complete performance for various service operations.
The most commonly performed service functions include:
Oil Reset Service
TPMS Programming Service
EPB Service
ABS/SRS Services
SAS Calibration Service
DPF Regeneration Service
Oil Reset Service
This function allows you to perform reset for the Engine Oil Life system, which calculates an optimal oil life change interval depending on the vehicle driving conditions and climate. The Oil Life Reminder must be reset every time the oil is changed, so the system can calculate when the next oil change is required.
Tire Pressure Monitor System (TPMS) Service
This function allows you to quickly look up the tire sensor IDs from the vehicle’s ECU, as well as to perform TPMS programming and reset procedures after tire sensors are replaced.
Electric Parking Brake (EPB) Service
This function has a multitude of usages to maintain the electronic braking system safely and effectively. The applications include deactivating and activating the brake control system, assisting with brake fluid control, opening and closing brake pads, and setting brakes after disc or pad replacement, etc.
ABS/SRS Services
This function allows you to perform various bi-directional tests to check the operating conditions of both the Anti-lock Braking System and the Supplemental Restraint System, such as Automated Bleeding, Pump Motor Test, and checking Module information, etc.
Steering Angle Sensor (SAS) Service
This service function allows you to perform calibration for the Steering Angle Sensor, which permanently stores the current steering wheel position as the straight-ahead position in the steering angle sensor EEPROM. On successful completion of the calibration, the steering angle sensor fault memory is automatically cleared.
DPF Regeneration Service
The Diesel Particulate Filter service function performs the regeneration procedure which is the DPF cleaning operation to clear the blockage through continuous burning of the particulate matter captured in the DPF filter. If the DPF light on the vehicle comes on and you successfully complete a DPF regeneration cycle, you will notice that the DPF light will automatically turn off.
Original Xhorse VVDI PROG Programmer V4.5.5 Télécharger
VVDI PROG Programmer
Support VAG EDC17 and BMW ECU
Support software update online
Latest version: V4.5.5
Hardware version: 1.2.2
Support English/Chinese languages.
En vente de Launch X431 V Replacement of X-431 V WiFi/Bluetooth
Launch X431 V Two Years Free Update Online
Top Reasons to Get Launch X431 V
1.Original device released by Launch tech.
2.Multi-language:French,German,Spanish,Russian,Japanese,Korean,Arabic,English,Traditional Chinese
3.Original bluetooth distance:10M(without obstacle)
4.Can replace X431 Diagun III or X431 IV
5.2 Years free update online
When we got Launch X431 Pro mini and wants to use it. How do we set the WIFI ?
Here is the steps to tell how to do
Note: If you don’t need to use Wi-Fi for a while, you can turn it off to conserve
battery life.
X-431 PRO MINI has built-in Wi-Fi that can be used to get online. Once you’re
online, you can register your X-431 PRO MINI, surf the Internet, get apps, send
email, launch the remote diagnosis, and check for software updates etc.
Connect to a Wi-Fi network
1. On the home screen, tap Settings > WLAN.
2. Slide the Wi-Fi switch to ON, X-431 PRO MINI will start searching for
available wireless networks.
3. Select a wireless network,
y If the chosen network is open, X-431 PRO MINI will connect
automatically;
y If the selected network is encrypted, a network password will need to be
entered.
4. When “Connected” appears, it indicates the Wi-Fi connection is complete.
Note: When Wi-Fi is not required, this should be disabled to conserve battery
power.
Once it is connected successfully, tap the Wi-Fi network from the list to view its
name, link speed, security type, IP address etc.
When this tool is in range, it will connect to the previously linked network
automatically.
Disconnect from a Wi-Fi network
1. On the home screen, tap Settings > WLAN.
2. Tap the network with a Connected status, then tap “Disconnect