Tacho Pro 2008 July PLUS Odometer Correction on BMW 5 series E39 high-IKE (instrument with 2 buttons)

Tacho Pro 2008 July PLUS Odometer Correction on BMW 5 series E39 high-IKE (instrument with 2 buttons)

This is mainly to showed you the Tacho Pro 2008 July PLUS Odometer Correction procedure on BMW 5 series E39 high-IKE (instrument with 2 buttons),since 11/1997, hardware 4,5,6, up to software 12.

Use this plug:

tacho-pro-2008-on-bmw-series-5-e39
• Remove the cluster.
• Connect the cluster plug with the white and blue port and the Tacho Pro 2008 July Universal. Ensure that the red point on each plug faces pin 1 on the instrument’s port.
• Select the menu BMW-5er/7er-E38/E39 high-IKE
• The Tacho Universal shows you the hardware and software version of the instrument.
• Enter the new value.
• Verify the new value with OK..
• The Tacho Universal asks now OK or UNDO
• If you take a look at the display now, you can see the new value. If it is good, press OK, if not, you can undo everything with STOP.

Related posts:

  1. Tacho Pro 2008 July PLUS Universal Dash Programmer Odometer Correction on Citroen Model Xsara
  2. Tacho Pro 2008 July PLUS Universal Mileage Correction on Model Audi A3/S3 VDO model 2000 Clip
  3. How to do Model Audi A3/S3 VDO model 2000 cluster plug with Tacho Pro 2008 July PLUS Universal?
  4. Tacho Pro 2008 July PLUS Universal odometer correction on Ford Focus Step by Step
  5. Tacho Pro 2008 July PLUS Universal Mileage Change on Audi Model A4 Bosch model 2001 clip