Tacho Pro 2008 July PLUS Universal odometer correction on Ford Focus Step by Step

Tacho Pro 2008 July PLUS Universal odometer correction on Ford Focus Step by Step

Tacho Pro 2008 July PLUS Universal is one French favorite device to do mileage correction. It can do multi-brand cars than the other tool. See the procedure to do on Ford Focus bellow:

Use the Scorpio plug:

tacho-pro-2008-july-on-ford-focus-1

26pin white port
• Pin 2      GND(-)          black
• Pin 9      RX (Data)     blue
• Pin 11   TX (Data)     yellow
• Pin 14   12V (+)          red
• Pin 16   12V (+)         red

Processor version 1:
• Connect Pin 1 ( left side down) and pin 2 (right from pin 1), or connect black to test point 3 (TP3).

tacho-pro-2008-july-on-ford-focus-2tacho-pro-2008-july-on-ford-focus-3

Processor version 2:
• Connect pin 1 (middle upside) and pin 2 (left beside pin 1), or connect black to testpoint 46 (TP46).

tacho-pro-2008-july-on-ford-focus-4
• Remove the cluster and open it.
• Connect the cables as shown in the picture.
• Select the menu Ford-Focus
• The Tacho Pro 2008 July PLUS Universal shows you the old value.
• Enter the new value.
• Verify the new value with OK.

Related posts:

  1. Tacho Pro 2008 July PLUS Universal Dash Programmer Odometer Correction on Citroen Model Xsara
  2. Tacho Pro 2008 July PLUS Universal on BMW Model 3 series E36 Compact up to Software 7
  3. Tacho Pro 2008 July PLUS Universal Dash Programmer UNLOCK on BMW Model 5 series E34 after 3/1989
  4. Tacho Pro 2008 July PLUS Odometer Correction on BMW 5 series E39 high-IKE (instrument with 2 buttons)
  5. Tacho Pro 2008 July PLUS Universal Mileage Change on Audi Model A4 Bosch model 2001 clip