Tacho Pro 2008 July PLUS Universal Dash Programmer Odometer Correction on Citroen Model Xsara

Tacho Pro 2008 July PLUS Universal Dash Programmer Odometer Correction on Citroen Model Xsara

Preparation:
Tacho Pro 2008 July PLUS Universal Dash Programmer
Use this board and clip:

tacho-pro-u2008-citroen

Operation Steps:

• Remove the cluster and open it.
• Remove the motors carefully from the circuit board. Do not pull off the needles!!!
• Look for the 8 pin chip 93C46.
• Look for the silver chrystal and join its contacts.
• Connect the clip to Port 1.
• Put the clip on the chip 93C46 (red on pin 1).
• Select the menu: Citroen-Xsara
• The Tacho Universal shows you the old value.
• Select the menu Adjust KM.
• Enter the new value.
• Verify the new value with OK.

Related posts:

  1. Tacho Pro 2008 July PLUS Universal Mileage Correction on Model Audi A3/S3 VDO model 2000 Clip
  2. Tacho Pro 2008 July PLUS Universal on BMW Model 3 series E36 Compact up to Software 7
  3. How to do Model Audi A3/S3 VDO model 2000 cluster plug with Tacho Pro 2008 July PLUS Universal?
  4. Tacho Pro 2008 July PLUS Universal Dash Programmer UNLOCK on BMW Model 5 series E34 after 3/1989
  5. Tacho Pro 2008 July PLUS Odometer Correction on BMW 5 series E39 high-IKE (instrument with 2 buttons)