Tag Archives: french obd tool

Tacho Pro 2008 July PLUS Odometer Correction on BMW 5 series E39 high-IKE (instrument with 2 buttons)

Tacho Pro 2008 July PLUS Odometer Correction on BMW 5 series E39 high-IKE (instrument with 2 buttons)

This is mainly to showed you the Tacho Pro 2008 July PLUS Odometer Correction procedure on BMW 5 series E39 high-IKE (instrument with 2 buttons),since 11/1997, hardware 4,5,6, up to software 12.

Use this plug:

tacho-pro-2008-on-bmw-series-5-e39
• Remove the cluster.
• Connect the cluster plug with the white and blue port and the Tacho Pro 2008 July Universal. Ensure that the red point on each plug faces pin 1 on the instrument’s port.
• Select the menu BMW-5er/7er-E38/E39 high-IKE
• The Tacho Universal shows you the hardware and software version of the instrument.
• Enter the new value.
• Verify the new value with OK..
• The Tacho Universal asks now OK or UNDO
• If you take a look at the display now, you can see the new value. If it is good, press OK, if not, you can undo everything with STOP.

FAQ for VOLVO VIDA DICE Diagnostic Tool V2014D

FAQ for VOLVO VIDA DICE Diagnostic Tool V2014D

Q: I have tried on 5 computers. The software showed “VIDA NOT OK”, how to fix?

volvo-vida-dice-2014-software-1
A: Volvo dice 2014D version or later version requires to install on Win7 64bit and please carefully read the .txt file “Read me”
about the computer configuration requirements.

Q: “Windows cannot find driver software for your device” error.

volvo-vida-dice-2014-software-2
A: This yellow warning icon says the Dice Driver is not installed successfully. Please confirm your computer system meet the following requirement.

Windows 7 professional operating system
It need to be Internet Explorer 8
Computer memory need over 3GRAM
C:// must have 40GB space
Software must install on C://
It must be NTFS format

Q: when I go VIDA All-in-one after I input the password ADMIN, it does not accept anything.
A: Please install “Vida_patch”, after complete installation, restart the computer, then it will accept.

Q: Can I use Volvo Vida Dice software to run on Mongoose for Volvo Vida Dice Diagnostic Cable?
A: No, you can’t.

Q: If it read fault code and do programming for my 2000 Volvo S80 t6?
A: It can do fault code for your car, but can’t do programming for it.

Q: If this item can read and edit BCU of Volvo s40?
A: No, this item is simply diagnostic tool, can read and edit BCU

Q: Does Volvo Dice work with my Volvo 850se 1996 year car?
A: Yes, it does. Generally Speaking, Volvo Dice works with Volvo from 1996 to 2013 year, it depends on the specific car model and Volvo Dice version.

Nouveau Logiciel de Renault Can Clip V153 Released!

Nouveau Logiciel de Renault Can Clip V153 Released!

V153 New Features: Fitted in new vehicle: MEGANE IV.
V153 New Operations: Reading of the diagnostics cards via the RNFI token.

When CLIP is closed, the connection window appears for the token and password must be entered so that the diagnostics card can be read. Buy the update Renault Can Clip V153 CD to update now!

How to solve the Autel MaxiDAS DS708 Scanner French SD card problem?

How to solve the Autel MaxiDAS DS708 Scanner French SD card problem?

Customers Problem: Autel MaxiDAS DS708 Scanner SD card gets damaged or lost accidently, and cause the machine prompt “SD card is damaged” or “Please insert SD card” when boot.

Solution: Buy new Autel MaxiDAS DS708 Scanner SD card, download software via PC Suit to update. If free update period expires, copy the old software into the SD card; if no back up, please pay for update.

Notes: Do not casually pull and plug SD card when machine powered, it’s easy to damage Autel MaxiDAS DS708 Scanner.
If SD card lost without registration via the serial number, please contact our technical support for the registration code, then complete the registration and update. If you still get message “SD card not insert” after changing another SD card, then you may get SD car slot damaged, please return to us for repair.

How to use the Linde Doctor and Linde Canbox Diagnostic Cable software?

How to use the Linde Doctor and Linde Canbox Diagnostic Cable software?

Linde Canbox Software:

linde-canbox-software

There two softwares. For the old cars, you need to use the :“Linde AC” and “Ltd_V2_0017_EN”.
For the new cars, try the rest “Pathfinder2013”,“Adobe Reader v7” and “How to install”.

Linde Doctor Software:

linde-doctor-software

For the Linde Doctor, it can use “Linde AC”, “Linde AC.rar” and “Ltd_V2_0017_EN”.

Tacho Pro 2008 July PLUS Universal Dash Programmer UNLOCK on BMW Model 5 series E34 after 3/1989

Tacho Pro 2008 July PLUS Universal Dash Programmer UNLOCK on BMW Model 5 series E34 after 3/1989

Prepare: Tacho Pro 2008 July Plus Universal

Board for brown and blue code plug:

tacho-pro-2008-bmw-model-5-e34-1

board for green code plug:

tacho-pro-2008-bmw-model-5-e34-2

1. Remove the cluster.
2. Look on the rear for a small plastic cover. Under it you can see a brown, blue or green code plug. You have to break this cover to get the code plug out.
3. Take the code plug out.
4. Put the brown or blue code plug on port 1. The pins of the code plug are marked on the bottom in the plastic. Pin 1 of the code plug must be positioned on pin 1 of the board.
5. If the code plug is green, put it on the board “BMW green”. There you can also see the shape of the code plug Put the plug carefully on the socket.
6. Select the menu BMW-5er/7er-blue
or BMW-5er/7er-brown
or BMW 5er/7er-green
7. The Tacho Pro 2008 Universal shows you the old value.
8. Select the menu Adjust KM.
9. Enter the new value.
10. Verify the new value with OK.

Brown code plug:

tacho-pro-2008-bmw-model-5-e34-3

Best Linde Canbox and Doctor Diagnostic Cable 2 in 1 2014 Version!

Best Linde Canbox and Doctor Diagnostic Cable 2 in 1 2014 Version!

Linde Canbox and Doctor Diagnostic Cable 2 in 1 is the combination of the New Linde Canbox USB Diagnostic Tool and the Linde Doctor Diagnostic Cable. The price is much acceptable. It takes with the functions of the two cables.

Linde Canbox Software Language: English, Hungarian, Dutch, Danish, Spanish, Italian, German, Dutch, Norwegian, Polish, Russian, French, Czech, Swedish,Turkish
Linde Doctor Software Language: English

Linde Canbox and Doctor Diagnostic Cable 2 in 1 Supported Linde Model:

1. Electric truck (E) 324 ,334 ,335 , 336 , 337 ,
2. Diesel / LPG truck (V) 350
3. Pallet stacker (L ) 379 , 372 , 141, 139
4. Pallet Truck 360 , 141 , 144 , 140
4. Order picker ( N+v ) 149 , 014 , 377 , 4516
5 . Reach truck ( R ) 113 , 115( CANBOX)
6. Tractor ( P ) 141 , 126 , 127

Linde Canbox 2 in 1:

linde-canbox-and-doctor-diagnostic-cable-8

Shop now: http://www.eobdii.fr/wholesale/linde-canbox-and-doctor-diagnostic-cable-2-in-1.html.

BENZ STAR C3 Super Mb star V2015.9 Updated with SDNC and Self-test Fix Function!

BENZ STAR C3 Super Mb star V2015.9 Updated with SDNC and Self-test Fix Function!

Super MB Star is a new version of Mercedes Benz diagnostic tool. It covers Benz cars from 1989 and it can be updated in the end of customer side. The newest software version updated to V2015.9.

This fix is for SUPER MB STAR C3 2015-9 Bugs:

1. Fix the SDNC C3 icon does not display after you connect Super MB STAR C3 hardware.
2. Fix the self-test function in star utilities can not start.
NOTICE:
A: This fix is for SUPER MB STAR C3 2015-9 Software ONLY!!
B: The password for the software installation is 123133322.

Free Gift plus 6% Storewide Discount for Thanksgiving, Stock Up Now!

Free Gift plus 6% Storewide Discount for Thanksgiving, Stock Up Now!

The promotion will start from 18th Nov to 2nd Dec.

6% Coupon Code: thanks. 

thanks-giving-eobdtool

If you order above 150EUR, you can choose one free gift from:

V2014.3 Multidiag Pro+/DS150 Software CD  

Attention: Once your order is over 150EUR, I will contact you to confirm the free gift. Any question, contact sales@eobdii.fr.