COMMENT METTRE A JOUR L’OUTIL DE PROGRAMMATION XPROG M XPRONG ECU POUR XPROG 5.74
As we all known , Xprog M 5.74 is the latest the xprog programming tool.
Some customers ask whether they can update their xprog m 5.0 to xprog m 5.74.
Here we share detail steps about how to update xprog m ecu programming tool to xprog m 5.74 ecu remapping tool.
Eobdii.fr Xprog Update Notice:
You are at your risk.
For Newer Xprog M 5.74 ,pls connect
You also need: ATMEGA64 Repair Chip update XPROG-M
Free download XPROG Box V5.7.4 software:
Free download XPROG M V5.7.4 setup exe:
How to update XPROGM V5.0 software to XPROG M V5.74:
Unzip the XPROG 5.7.4.zip contents to a folder on your desktop.
Open the folder AVRDUDESS and run avrdudess.exe program.
The following procedure will flash the version 5.0 firmware on your XPROG device.
Select your programmer.
Click on “Detect” at the top right corner. It will detect ATMEGA64.
Select your flash file which is in the Firmware folder.
Select your EEPROM file which is in the Firmware folder.
Enable the “Erase flash and EEPROM (-e)” option.
Set the following in the “Fuses & lock bits”
And enable the “Set fuses” and “Set lock” options.
Finally click on “Program” and wait till it finishes and verify all the data are flashed correctly.
If not then try again.
Now that the Xprog has version 5.0 firmware, go to the “XprogDesktop” folder and run “XprogDesktop.exe” file.
Click on “Help->Hardware info…” and once it opens it will ask to upgrade the firmware.
If not, then click on the “Upgrade” button. Once this procedure is finished you can try and read a processor. It will ask for a certificate. If it fails try again.
When it is finished the XPROG will run the latest firmware and you will be able to work with the latest Xprog 5.74 software!
Again note that this is not a 100% successful guide, some work and some may not.