Tag Archives: lonsdor k518ise programmer

Lonsdor New Functions Instruction

Lonsdor K518ISE New Functions Instruction
Update Time:Oct.22th 2018

1.Click”Trial Apply” to get the latest update.


1.Each device can apply for only one time, once click,counting will start and will lasts for 90 days.
then the”Trial apply” menu will disapper.
2.Functions with blue clock will be for free for 3 months,after that time, cutomer will need to subscibe to use.
3.The rest functions updated this time will be for free forever.
4.Check the update log for a basic idea of the update content this time.For more details,Lonsdor will update continuously later in flyer,please check the update log later then.Also you can check www.lonsdor.com for the detailed  car list.


II.New&clearer model mark:


III:Search the car by model initials



IIII:Scan the QR code to get operation reference during programming.


Step1:Click the red mark to get the QR code
Note: So far, lots of car models have Help reference,once there is a red mark as shown above,
you can scan to get detailed operation reference.

Step2:Scan the code with your phone to get operation instruction during programming


V:Push function
In case customer need lonsdor to support certain car model,and we may already have it on our inner test device,though not
release on standard K518 yet Or when lonsdor developed certain function while can’t find local car to test,if customer can
find the local car to test, please contact Lonsdor and we will release the function only to your device for certain time(it will depends)
as a return for your kind help



Lonsdor K518ise has a special function – changing chip ID’s, including

Chip 4D, ID46, ID48, T5, 7935


Here are chips can be generated by Lonsdor K518ise key programmer.

Special function – generate key chip – chip 4D, ID46, ID48, T5, 7935


lonsdor-k518ise-generate-keys-3 (1)

lonsdor-k518ise-generate-keys-3 (2)

Chip 4D




Chip ID46





Chip ID48: TP22, TP23, TP24, TP25, JETTA (2010-)


Chip T5: Chip 11, Chip12, Chip13, Chip33


Chip 7935




Lonsdor K518ISE K518 Key Programmer Avis de mise à jour gratuit

Free Update[March 21, 2018]

Mitsubishi\Select from vehicle\America\South America\ASX
Mitsubishi\Select from vehicle\America\South America\Diamonte
Mitsubishi\Select from vehicle\America\South America\Eclipse
Mitsubishi\Select from vehicle\America\South America\Eclipse[CAN]
Mitsubishi\Select from vehicle\America\South America\Endeavor
Mitsubishi\Select from vehicle\America\South America\Endeavor[CAN]
Mitsubishi\Select from vehicle\America\South America\EVO
Mitsubishi\Select from vehicle\America\South America\Galant
Mitsubishi\Select from vehicle\America\South America\Galant[CAN]
Mitsubishi\Select from vehicle\America\South America\Lancer
Mitsubishi\Select from vehicle\America\South America\Lancer[CAN]
Mitsubishi\Select from vehicle\America\South America\Montero
Mitsubishi\Select from vehicle\America\South America\Montero[CAN]\2007
Mitsubishi\Select from vehicle\America\South America\Outlander
Mitsubishi\Select from vehicle\America\South America\Outlander(2013)
Mitsubishi\Select from vehicle\America\South America\Outlander[CAN]
Mitsubishi\Select from vehicle\America\South America\Outlander\Pajero\v97\v98
Mitsubishi\Select from vehicle\America\South America\Outlander\Rvr\2012
Mitsubishi\Select from vehicle\Europe\3000gt
Mitsubishi\Select from vehicle\Europe\ASX
Mitsubishi\Select from vehicle\Europe\Carisma
Mitsubishi\Select from vehicle\Europe\Colt Lander
Mitsubishi\Select from vehicle\Europe\Eclipse
Mitsubishi\Select from vehicle\Europe\EVO
Mitsubishi\Select from vehicle\Europe\Galant Wagon
Mitsubishi\Select from vehicle\Europe\Galant\1996-2004
Mitsubishi\Select from vehicle\Europe\Grandis
Mitsubishi\Select from vehicle\Europe\I-miev
Mitsubishi\Select from vehicle\Europe\L200
Mitsubishi\Select from vehicle\Europe\L200[CAN]\2011-
Mitsubishi\Select from vehicle\Europe\L400
Mitsubishi\Select from vehicle\Europe\Lancer
Mitsubishi\Select from vehicle\Europe\Lancer Sportback
Mitsubishi\Select from vehicle\Europe\Lancer Wagon
Mitsubishi\Select from vehicle\Europe\Lancer EX
Mitsubishi\Select from vehicle\Europe\Lancer[CAN]
Mitsubishi\Select from vehicle\Europe\Magunm
Mitsubishi\Select from vehicle\Europe\Mirage\2013
Mitsubishi\Select from vehicle\Europe\Outlander[CAN]
Mitsubishi\Select from vehicle\Europe\Outlander
Mitsubishi\Select from vehicle\Europe\Pajero PININ
Mitsubishi\Select from vehicle\Europe\Pajero\1999-2006
Mitsubishi\Select from vehicle\Europe\Shogun
Mitsubishi\Select from vehicle\Europe\sigma
Mitsubishi\Select from vehicle\Europe\Space Wagon

Pour plus d’informations, veuillez visiter le lien suivant


Lonsdor product service center operation guide

Website: http://u.lonsdor.com
Note: This service center is now specific to the following 3 car brands: VOLVO, MASERATI,
Step 1: Input user account and password to enter.
Note: The account and password must be the one when you registered our device



Step 2:
Choose your device model


Step 3:
Choose the car model


Step 4:
Choose the key type that you want to transfer data (say ”Key(straight)”, which refers to common
keys like S40、 C30、 C70, etc.)


Step 5: Data conversion operation
1. Device PSN is default.
2. Choose the car type, like S40、 C30、 C70 ect.
3. Upload the right EEPROM(2) first, and then upload the left EEPROM(1) data.

4. Submit data.



Step 6:
Once submit the data, the system will calculate data and refresh automatically, until the final
result shows.
Note: If the data is misplaced, or the data is incorrect, the conversion will fail


Step 7: Calculating complete, please click to download the data, and put the data in the
corresponding folder according to ”Operation Guide


Lonsdor K518 Add New Key & Program Key All Key Lost for Toyota Corolla G chip

This post focus on the topic of how to use Lonsdor K518 add new key or program key all lost for Toyota Corolla G chip.

Add new key(2010 key chip)
1.Perform this function you need a master key.
Insert the key into the ignition,if the immo light does not light on,the key is master key.And if the immo light light on about 1 second and the off,the key is spare key.

2. Insert master key into the ignition,and turn it to “ON”,then waiting system communicating…
3. Insert the key you want to add(don’t need to turn the key)
4. Waiting for system programming,it will complete after a few seconds

Delete Keys(2010 chip)
Perform this function you need a master key.
Insert master key into the ignition,and turn it to “ON”,then waiting system communicating…
Insert the key you want to add(don’t need to turn the key)
Waiting for system programming,then deleting complete

Reset IMMO(for all key lost)
Note:After performing this operation,it no need to reprogram immo controller(2010 chip)

After reset the immo controller,it will restore to default status.
Turn off ignition,turn on ignition
System programming,pls follow guide to turn on or turn off the ignition…pull out key.
Please complete below step within 120s:
1 Program 2 master keys and 1 spare key
Insert first master key,turn ignition to on position and waiting for 5 seconds.
Insert second master key,turn ignition to on position and waiting for 4 seconds.
Insert thirdly spare key,turn ignition to on position and waiting for 5 seconds,then the immo light off,the programming complete.

How to Program Volvo S60 Smart key by Lonsdor K518ISE

How to Program Volvo S60 Smart key by Lonsdor K518ISE

Vehicle and Key Information:
Chip model: Dedicated chip(brand new)
Remote type:433 frequency
Key embryo no.:No.24/38
PIN code requirement:Dismantle & read CEM to backup security data and program
Remote generation:Program smart key complete, remote will automatically generated
Under the lower-left of the steering wheel:

Car model: Volvo S60

Smart sensor-to-start key (6-button)

Volvo’s CEM is basically located behind the storage box which is in front of the co-pilot seat

Volvo’s KVM modules are basically located in the trunk, in the right rear wheel position
1. Add smart key: to add a smart key or program on all key lost;
2. Delete smart key: delete the already programmed smart key;
3. Read the CEM security data: dismantle & read CEM to backup security data (this is a must before programming);
4. Read the KVM security data: dismantle & read KVM to backup security data (this is a must before programming);
5. Key identification and unlocking: to detect whether the key is a new unused one. If the remote control is invalid after programming (on condition that the battery has been installed and the remote frequency is correct), try to import the CEM safety data to unlock the key and program again after unlocking.
Note: it can only unlock the CEM safety data of the vehicle or the corresponding vehicle
6. Module identification: identify the body CEM / KVM module status, please do this before all the operation, this function can ensure the module status, and distinguish between full-keyless / half-keyless. In addition, when the safety data backup is completed, and the module has been installed where it should be, please perform “module identification” again just in case and then proceed programming.
1. When programming Volvo 6-button keys, please be sure to dismantle&read the CEM and KVM first, as to their location and how to read, please refer to the “Operation” or “Reference”
2.First time to use the adapter, you need to bind it with K518ISE. Go to the K518ISE home page and choose “Settings -> Bind adapter”, following the direction to finish binding. One K518ISE host can bind up to 5 adapters, and the bound adapter can not be bound to other K518ISE hosts. Once bound, no need to bind again.
3. For the 6-button key, you need to dismantle & read the CEM in the co-pilot storage box,as well as the KVM in the right trunk to backup security data.
4.Connection between Lonsdor K518ISE host, adapter and RN-01 board :

5. Read Volvo CEM please use RN-01 board:

6. Connection between K518ISE host, adapter and FS-01 board:

7. Read Volvo KVM please use FS-01 board:


Module identification
Before all operation, please connect the car OBD to “Module identification”, which can detect the module (CEM / KVM) status, distinguish if the car is full key-less or half-key-less.
Test status results: (1) Installed. (Indicating that the corresponding module status is normal)
(2) No installation or communication failure. (That the car does not have the corresponding module, or the module status is abnormal)
After the backup of the safety data is completed, install back all the modules accordingly. Please do “Module identification” again, check to ensure that the module is well installed and in normal status. And then do programming operation.
Read CEM security data:
1. Volvo’s CEM are located under the co-pilot airbag on the left, the removal of the co-pilot glove;
Volvo’s CEM is basically located behind the storage box which is in front of the co-pilot seat

CEM boxes may have the same appearance, but the back of the circuit wire location is different, can be called type A and B .
Type A: open the lid, pay attention to the black columns in the blue circle on the back of the circuit board, those are four positioning points, stably match them respectively with the white columns on RN-01 board.
Note: The circuit board is coated with insulating glue, it is required to use the washing plate water to wash it off the blue area of the insulation coating in the contact point (solder joint) , or power can not go through, if the needle of RN-01 board is broken, it will need to wire in the corresponding locations.
(First time to use the adapter, please bind it with Lonsdor K518 ISE host, please refer to”Function”)


Type B: Its circuit is different from that of type B, it requires to wire to read immodata, please refer to below wire instruction:


Note: Connect power to read the data, it is required to separate RN-01 board to the motherboard to prevent conduction; welding line should not exceed 15cm.

Read KVM security data:
1. Volvo’s KVM modules are located in the rear of the car rear, right rear wheel position (16 S60L recommended from the right rear door to the wheel direction);


2. Open the module cover, you must first use the washing plate to clean the blue area of the insulation coating,
or power can not go through, please bind it with Lonsdor K518ISE car key progammer host, please refer to”Function”)

3. The points in the red area are the 8 pin insertion points on the FS-01 board:


Part of the Volvo KVM data read failure is because the chip model is different, then please:
① use the programmer to read out the data (.bin file);
② Please contact the after-sales (phone / QQ: 4009669130) and send EEPROM data to them, then the engineers will transfer the data into a special file;
③ Then please connect K518ISE to the computer, put the special file into the”file —> feature_35”folder;
④ Please continue programming to select the KVM data from the process.
Read KVM data with programmer:

1. When programming Volvo 6-button key, be sure to dismantle & read the CEM and KVM, as to their location and how to read them, please refer to the “Operation” or “Reference”.
2. It is required to bind the adapter when using it for the first time, you need to bind it with K518ISE. Go to the device home page and choose “Settings -> Bind adapter”, following the direction to finish binding. One K518ISE host can bind up to 5 adapters, and the bound adapter can not be bound to other K518ISE hosts. Once bound, no need to bind again.
3. For 5-button key, you only need to dismantle&read the CEM in co-pilot storage box to backup security data, for 6-button key, you need to dismantle&read the CEM in co-pilot storage box, as well as the KVM in the right trunk to backup security data.
4. For 6-button key, you need to first insert the key into the key slot and then operate according to the directions.
5. Check if the card is locked when it can’t be inhaled in the key slot, locked key can’t be inhaled, a new card generally will not be locked.
6. When install battery to Volvo models, please pay attention that the two batteries are overlapped, separated by a white paper in between, do not just replace the above one.
Disassemble is also very simple, remove the metal key, in the place where the key lies, please find a little knife with not too sharp blade, gently open it from the gap.