Tag Archives: Lonsdor k518

LONSDOR K518ISE CAN GENERATE KEY CHIP 4D 46 48 T5 7935

Lonsdor K518ise has a special function – changing chip ID’s, including

Chip 4D, ID46, ID48, T5, 7935

lonsdor-k518ise-generate-keys-3

Here are chips can be generated by Lonsdor K518ise key programmer.

Special function – generate key chip – chip 4D, ID46, ID48, T5, 7935

lonsdor-k518ise-generate-keys-1

lonsdor-k518ise-generate-keys-3 (1)

lonsdor-k518ise-generate-keys-3 (2)

Chip 4D

lonsdor-k518ise-generate-keys-4

lonsdor-k518ise-generate-keys-5

lonsdor-k518ise-generate-keys-6

Chip ID46

lonsdor-k518ise-generate-keys-7

lonsdor-k518ise-generate-keys-8

lonsdor-k518ise-generate-keys-9

lonsdor-k518ise-generate-keys-10

Chip ID48: TP22, TP23, TP24, TP25, JETTA (2010-)

lonsdor-k518ise-generate-keys-11

Chip T5: Chip 11, Chip12, Chip13, Chip33

lonsdor-k518ise-generate-keys-12

Chip 7935

lonsdor-k518ise-generate-keys-13

lonsdor-k518ise-generate-keys-14

http://www.eobdii.fr/lonsdor-k518ise-key-programmer-support-vw-4th-5th-immods.html

How to set WIFI for Lonsdor K518 ISE Programmer

How to set WIFI for Lonsdor K518 ISE Programmer

There are two situations to set WIFI for K518 ISE

The first one, the new K518 need to connect wifi to register and update

The second , the device shows wifi connected but can not do update

The steps to connect WIFI

1.Open the device and select “Settings”

1

Choose WIFI Settins

2

It shows the WIFI had been connected

3

But when it show connected,but we can do update, how do we check the settings ?

1.Press the connected WIFi for a long time and then it appears as following one

4

2.Press “back button”

5

6

7

8

Change the IP Address 1 to 114.114.114.114 and it is ok .

Then you just need to restart the device

9

10

Lonsdor product service center operation guide

Website: http://u.lonsdor.com
Note: This service center is now specific to the following 3 car brands: VOLVO, MASERATI,
FERRARI
Step 1: Input user account and password to enter.
Note: The account and password must be the one when you registered our device

lonsdor-k518ise-enter-page-1

lonsdor-k518ise-enter-page-2

Step 2:
Choose your device model

lonsdor-k518ise-enter-page-3

Step 3:
Choose the car model

lonsdor-k518ise-enter-page-4

Step 4:
Choose the key type that you want to transfer data (say ”Key(straight)”, which refers to common
keys like S40、 C30、 C70, etc.)

lonsdor-k518ise-enter-page-5

Step 5: Data conversion operation
1. Device PSN is default.
2. Choose the car type, like S40、 C30、 C70 ect.
3. Upload the right EEPROM(2) first, and then upload the left EEPROM(1) data.

4. Submit data.

lonsdor-k518ise-enter-page-6

lonsdor-k518ise-enter-page-7

Step 6:
Once submit the data, the system will calculate data and refresh automatically, until the final
result shows.
Note: If the data is misplaced, or the data is incorrect, the conversion will fail

lonsdor-k518ise-enter-page-8

Step 7: Calculating complete, please click to download the data, and put the data in the
corresponding folder according to ”Operation Guide

lonsdor-k518ise-enter-page-9

lonsdor-k518ise-1-180

Lonsdor K518ISE programs Volvo S40 key and remote key

Lonsdor K518ISE programs Volvo S40 key and remote key

Some customer have problem to program volvo s40 keys, will encounter this problem:
Lonsdor-K518ISE-programs-Volvo-S40-key-error

So we do this user tips to help you to do Volvo S40 key programming with Lonsdor K518ISE:
1. Add key
Common key: add one piece
Smart key: Add one piece

2. Delete key
Key: delete the programmed key. Before deleting the key, please firstly select “Identify key ID” and record the ID info, during this process “The selected key ID will be deleted”.
Smart key: Delete all smart keys. If the key available is deleted, you could program it again.

3. Identify key ID
Key: the ID of key available can be identified, please record data.

4. Key unlock:
Key: Lonsdor K518ISE can detect and identify if the key is locked or not, if locked, K518ISE will unlock it. Note: K518ISE can unlock the key to the original car or the key with CEM security data.

Smart key: Lonsdor K518ISE can detect and identify if the key is locked, if yes it will unlock it. Note: only unlock the key of your car or corresponding cars’ key with CEM safe data.

As for “How to indentify smart and semi-smart key”, go for the last part.
1). Please dismantle the CEM (located in front of the passenger seat and the back of the storage box). There are 2 kinds of boxes, and the wiring is different, please follow the below diagram to wire and use K518ISE to read out 2 copies of data from left to right.
The wiring diagram of style-A box
Lonsdor-K518ISE-programs-Volvo-S40-key
Lonsdor-K518ISE-programs-Volvo-S40-key-1

The wiring diagram of style-B box ( double 1L15Y wiring diagram, the wiring position on the left is the same as that on the right)
Lonsdor-K518ISE-programs-Volvo-S40-key-2
Lonsdor-K518ISE-programs-Volvo-S40-key-3

2) After you read out the data, please provide your seller/ engineer with  the 2 copies of data and K518ISE serial number, then wait for them to transfer it into special data. After you obtain the data, plug K518ISE to the computer and put the special data into the “customfile” folder for programming.
Lonsdor-K518ISE-programs-Volvo-S40-key-4

3)  Add key on Volvo S40
Key: to add key, please input the new key’s remote ID and remote code (choose 16bit/24bit).
Note: There are 2 types of key (P/L), please confirm the new key’ style and packaging are the 100% same as that of the old key.

Smart key: just follow the instruction.
Key:
1) delete the key: before deleting the key, please firstly choose “Identify key ID” and record the ID info. During this process,  “The selected key ID will be deleted”.
2) Please be sure to keep the new key box where printed the remote info that you will need to enter when adding key.
3) If the car has no KVM box (under the driver seat) it has a normal key, not remote.
4) During the key programming, you need to enter the remote ID and remote code (select 16 digits or 24digits).

Note: There are 2 types of key (P/L), please confirm the new key’ style and packaging are the 100% same as that of the old key.

P style:
The remote ID is 8 digits (No. 1 shown as below)
The remote code is 16 digits (NO.2 shown as below)
Lonsdor-K518ISE-programs-Volvo-S40-key-5
L-RFK style:
The remote ID is 8 digits (No. 1 shown as below)
The remote code is 16 digits (NO.2 shown as below)
Lonsdor-K518ISE-programs-Volvo-S40-key-6
Lonsdor-K518ISE-programs-Volvo-S40-key-7
Smart key:
1) Unlock: only unlock the key that K518ISE is working with or the key with CEM security data.
2) Delete the key that is programmed, after that the original key could be programmed again in the same car but if unlocked it won’t be used on another car.
3) S40 smart key programming needs no dismantling and reading KVM.
How to identify smart key and semi-smart key?
1) Smart key: comes with a coil, marked with “PK” on the packaging and no remote code (see the left picture below)
2) Semi-smart key: No coil, marked with “RFK” on the packaging and has remote code of 16 / 24 digits (see the right picture below)
Lonsdor-K518ISE-programs-Volvo-S40-key-8

How to identify if the car has smart key or semi-smart key?
1) If you can find a KVM box under the driver’s seat, it is a smart key, otherwise, it is semi-smart key.
2) The key handle is a plastic model key while the semi-smart key doesn’t have that.
Lonsdor-K518ISE-programs-Volvo-S40-key-9
Lonsdor-K518ISE-programs-Volvo-S40-key-10

Chip: 48 chip

Remote style: normal remote frequency: 433MHz; smart remote frequency: 433MHz

Key fob: Dedicated small key No. 24/38

Password requirement: dismantle and read CEM, backup security data, then program.

Remote generation:
Normal key: during key programming, you need to enter the remote ID and remote code, after the key is programmed successfully, then remote is generated.
Smart key: after the remote card is programmed successfully, the remote will be generated automatically.

OBD position: on the bottom left of steering wheel.
Lonsdor-K518ISE-programs-Volvo-S40-key-11

Other information
1) car model
Lonsdor-K518ISE-programs-Volvo-S40-key-12

2) Key:
during the key programming, you need to input the remote ID and remote code (16 digits or 24digits).
There are 2 types of key (P/L), please confirm the new key’ style and packaging are the 100% same as that of the old key.

P style:
The remote ID is 8 digits (No. 1 shown as below)
The remote code is 16 digits (NO.2 shown as below)
Lonsdor-K518ISE-programs-Volvo-S40-key-13
L-RFK style:
The remote ID is 8 digits (No. 1 shown as below)
The remote code is 16 digits (NO.2 shown as below)
Lonsdor-K518ISE-programs-Volvo-S40-key-14
Lonsdor-K518ISE-programs-Volvo-S40-key-15

3) CEM box position (shown as below)
Lonsdor-K518ISE-programs-Volvo-S40-key-16

4) Smart key:
You are advised to refer to the original key to select the new key. For example, the L-PK-434 key below is a remote key, which doesn’t have remote code of 16/24 digits.
Lonsdor-K518ISE-programs-Volvo-S40-key-17