Tag Archives: cgdi bmw programmer

V2.2.0 Programmeur clé BMW CGDI pour les étapes de correspondance clés FEM / EDC

V2.2.0 Programmeur clé BMW CGDI pour les étapes de correspondance clés FEM / EDC

1.Copy key with key
2.Copy key without key

Open the car door, OBD
connects the vehicle and
equipment, the vehicle
maintains voltage above 12v ,
do not turn off the computer
screen during operation.

1

Select “FEM/BDC key match” and click enter

2

Connect successfully, maintain enough voltage, click “yes”

3

Need to disassemble the module, read EEPROM data, FEM is 95128

4

FEM module installation location

5

Use CG-100 to read
out 95128 IC data and
save the data

6

Remove the 95128 chip, wash it, and clip it to the ATMEGA adapter

7

Open the CG-100 to read the data and save it

8

Go back to cg-di and load the data

9

Load successfully, save the new data generated by the system

10

Write back new data with cg-100, weld back to module, and click next

11

Waiting for programming

12

After programming, write back 95128 original data,
put FEM into the car again, and click next

13

Use CG-100 to write back 95128 original data

14

When finished, click “next”

15

Set code successfully, customers can do any operation

                                                            Copy key with key

16

choose the unused key, and click “generate the dealer key”

17

Read working key,click Next

18

Read successfully and display information

19

Match the new key

20

The new key matched successfully

                                      Copy key without key

Using CG – 100
Read the engine data

21

Click to enter “ECU”

22

Click on the engine model option to enter the current vehicle

23

According to the software physical wiring diagram wiring

24

Physical connection

25

Click read EEPROM

26

Read successfully and save the data

27

Show ISN and VIN

28

Return to cg-di, select unused key bits, and click “generate dealer keys”

29

Click on the next item that you select and click next
(Manually input known ISN)

30

Check the information and click ok

31

Place new key

32

New key programming success