VEDIENT ilink400 full system scan tool do dignosis and adaption on VW
Tag Archives: vident ilink400 tool
Mise à jour et impression du logiciel VIDENT Products
Mise à jour et impression du logiciel VIDENT Products
To apply software updates to the tool you will need a Windows PC/Laptop and TF Card Reader.
1.Software Update
1.1 Step One-Install the Update Client
1.Visit www.videnttech.com to download the update client from http://www.videnttech.com/support/
2.The file download will be compressed zip file.Open that file and run the installer inside it
1.2 Step Two-Creat Your Vident Account
Firstly, you need to create an account with Vident
1.Once instlaled, boots up the iScanzilla software,click the register button
2.Fill out the registration form and submit
Altenatively, you can click the Sign Up button on the right upper side of our website to creat
an user account.
1.3 Step Three-Register Your product
1.When logged in iScanzilla,click the “Register Products’icon.
2.On the “S/N” Registration tab,put a tick in the box marked”001″then enter the product’s serial number
and paswor,and click Submit
Please connect the scan tool with computer through the USB cable,select “Setup>About to check the Serial Number and
Register Password”
3.A confirmation box should be shown confirming successful registration.
Alternatively, you can register the product in the member center when logged in on our website
1.4 Step Four-Update the software
1.Now close the iScanzilla software, remove the TF card from your tool(making sure the tool is turned off first)and
connect it to the PC via an TF car reader.
2.Once Windows has detected the TF card, run the iScanzilla softare and login again. Click the “My Updates”button.
After a few seconds, a list of the available software updates will appear
Ensure that the correct serial number is displayed in the drop-down list.
3.Click the Update button to downlaod and install availabe udpates
Please note: the update process can take a long time. If your tool had been updated recently, it may take a few hours for the update process
to complete. Once the update had completed, dont forget to “safety remove” the SD card in Windows before upplugging it, to avoid the possibility
of data corruption
2 Renewals
If your free update ran out, you tool will continue to function-it will not “time out” but you will no longer be able to
access the update serves. Should you wish to continue updating your tool, you will need to purchase an update package.
Please go to our website and log in to process the puchasing.
3 Printing Data
It’s very easy to print out the test result through iScanzilla
1.Click the button located on the upper side of iScanzilla. You can enter the print screen without login iScanzilla
2.All data saved/stored in the TF card would appear on screen