Tag Archives: french obd tool

Free download GM Tech 2 PCMCIA bin file

gm-tech2-in-carton-package-b3-1-600x264

As we know, there are a lot of free software in eobdii.fr website

so there are some of car tool software maybe fit for you/

There is software that can reprogram the 32MB PCMCIA card within the GM Tech2 diagnostic scanner via serial cable with bin files. Here gathering some download resources of the Tech II PCMCIA bin file with multi-language and versions.

How to load software on Tech2 scan tool 32GB card?

Insert tech2 card into pcmcia port on laptop and use mce to write the required bin to card, once done remove card and place in tech 2 and power on.
Tech2 card writer is one of them but the method is much slower then reprogramming in pcmcia slot. Tech2 card writer can be downloaded free below as well.

Disclaimer: You are on your own risk.
NO PASSWORD.

Download 1:
https://mega.co.nz/#fm/3k8hRZTZ

File including:
New version Tech2 PCMCIA 165.000.rar English (used with TECH2 or with TECH2WIN)
Opel German 164.000.zip
Opel German 154.000.zip
Opel 150.020 english.rar
Opel_161.002.rar
Saab 148.000 English.rar
SAAB 148.000 32MB German
TECH 2 OPEL VAUXHALL V159.001.rar
Tech2-cardwriter.rar

tech2-bin-file-2

Download 2:
https://mega.co.nz/#F!JlhF2STa!8ElYLExLisPlBaRbIX5sjQ
Tech2 & Tech2Win PCMCIA 32GB Card Bin Files Opel Multi-Language

You have inside:
Opel 165 EN; DE ; FR ; IT
Opel English 165, 171, 172 and 175
Tech2Win v2.302
27.05.2015 – Added Opel version 176

tech2-bin-file-3

Download 3:
http://www.filedropper.com/tech2cards
Tech 2 cards bin files in English:

Zip file contains:-

Cadillac 117.500.bin
Cadillac BLS 120.000.bin
Opel GT Chevrolet HHR V30.004.bin
China-1 29.002.bin
Holden 1997 – 2012 V157.000.bin
Saab 148.000.bin
Holden Export V149.000.bin
Saturn Astra V31.001.bin
Isuzu 107.021.bin
Suzuki 28.007.bin
Isuzu truck 11_530 1996-2011.bin
Isuzu truck 11_530.bin
ISUZU Truck CAN 122_050.bin
Suzuki 29.003 eng.bin
V33-002_NAO_EN.bin
nao 32.08.bin
vauxhall.bin
opel 137.000.bin
opel_160-000_en.bin
OpelVauxhall V166.00.bin

NOTE:
Tech 2 32MB memory PCMCIA is available here:
Tech 2 32MB B card

How to install WinOLS 2.24 on Windows 7/XP 32bit

new-genius-flash-point-obdii-tuning-tool-2-620x264

FREE WinOLS v2.24 Where to get:

http://www.eobdii.fr/wholesale/genius-flash-point-ecu-chip-tuning-tool.html

https://mega.nz/#!AApGDKpL!MV84PFdQIiNFwXdggnSC5yhGe-3edK92weYv0X0tQNA (not tested)

WinOLS 2.24 software is not sold separately on the web. If you want tested WinOLS software only, go to WinOLS v1.500:

http://www.eobdii.fr/wholesale/winols-version-1500-with-unlock-patch.html (€9)

For WinOLS tested versions:

Only working under 32 bit systems (Windows XP or 7)

How to install WinOLS 2.24 Windows 32 bit:

First, it’s a customer solution. Good luck.

I ended up getting it installed.

1. Install “setup.exe”

2. Take the following 3 files:
EVC_key.dll
EVClicenceMOD.dll
loader_ols_32bit

and put them here:
C:\Program Files\EVC
***THIS IS WHERE MINE WAS GOING WRONG, SETUP.EXE AUTOMATICALLY INSTALLS THE EVC FOLDER INTO “PROGRAM FILES (X86)” IF THIS IS THE CASE, MOVE THE WHOLE “EVC” FOLDER INTO THE NORMAL PROGRAM FILES, NOT PROGRAM FILES X86***

3. Install “winols_testversion.exe” and run through the setup, just keep clicking yes/OK. At the end of the install it will launch the program, let it do that, but just close it after it opens, don’t play around with it.

4. Go back into C:\Program Files\EVC and double click “loader_ols_32bit”, this should bring up a window saying something along the lines of “Restart the app”. If it says “error starting app”, you’ve gone wrong somewhere. Take note of the red bit above ^

5. Go to start>control panel>add/remove a program>uninstall WinOls 2.14.03
This is the test version you just installed, DON’T delete the full version you installed first.

6. Again, go back into C:\Program Files\EVC and right click “loader_ols_32bit” and send to desktop. This will create a shortcut on the desk top. Then, on the desktop, delete the shortcut to WinOls. If you open WinOls directly it will mess it all up, you have to open the program by using “loader_ols_32bit” which now also has a shortcut on the desktop. I renamed the loader shorcut “WinOls” to simplify things.

Lastly, tune things, give them massive amounts of power, give horsepower to the people, fry tyres and make lots of noise.

First install WinOLS_Testversion.exe & launch program, configure as required

Once the application is opened close it & uninstall via “Add or Remove Programs” via control panel or “Programs & Features” (W7)

Navigate to C:\Program Files

Now copy / paste the “EVC” folder to this location. If you get a question about folder replacement answer “YES TO ALL”

Now navigate to C:\Program Files\EVC

Right click on “loader_ols_32_XP_free.exe” then select send shortcut to desktop (You can rename it later)

Now run the program using the shortcut & you will get a message about the License key completed, click OK

Now run again the program & configure as required ….You should now have a registered version of WinOLS 2.24

clone wiTECH VCI Pod off Ebay: Foget it!!

witech-vci-pod-1-620x264

The awesome write-up: great to know a clone Chrysler wiTECH VCI Pod.

Here to share all I know about wiTECH VCI pod and the clone I have. This is a long, long story that still is being written.

Sept 2013 Bought only one off ebay at the time for $500 around came with version 13.xx. The clones do not have a wifi radio like the real thing, but otherwise function the same. (perhaps the quality is not, but seems OK)

Worked great first few times, connects with USB cable and uses BrightStar “Ethernet Gadget” drivers which acts as an IP device over USB with a default address 172.22.22.22. The WiTECH Server has to be running first for the application to detect the pod on it’s “own little network”. WiTECH Server installs as start up item until changed.

When it works, it works great. The wiTECH application and pod gives you most dealer level capabilities. Also the DRB III emulator does work on later PCI (not CCD) vehicles, read somewhere there may be a “Smart Cable” for older CCD. (The actual wiTECH is CAN only.)

Problem is you cannot be online, which forfeits some of the functionality a registered pod with valid login or subscription would provide. If you did have all that it will show which modules have available updates, allow you to perform the flash updates, and provide direct links to bulletins and other useful resources.

Another problem of being online is what most of the discussions are about. Once the application checks the DCC servers for a valid device – you’re done. Would get “Unregistered device” or “Unable to Reach wiTECH Server” if offline after the first “phone home” and subsequent self update. Also installs extremely annoying “Common Software Manager”, is or is like Flexnet, very difficult to remove or disable.

Now when this first happened to me I reached out to the seller, and was directed to install a downloaded version 14.xx on another PC, and stay offline when using application and device. Not wanting to give up my netbook loaded with many other diagnostic applications and drivers, uninstalled completely including deleting all files and registry entries I could find.

After a clean reinstall, worked great again. Over time I repeated this multiple times, either forgetting to go offline or installing on other PCs. Found there was no way to maintain a stable installation if open when online.

The latest problems arose from the USB socket on the pod. Have replaced it twice, but the last time could not restore the connection, this was subject of first MHH post asking for help. Now I’ve learned there is a web interface in the pod, and I could have enabled the LAN Ethernet port while there was USB communication.

Weeks of repair attempts and emails back and forth with Chinese eBay seller followed, I truly think he wanted to help, even though there was no warranty. But after beating the basics to death, and them wanting a video of the problems I gave up. I just wanted to get it repaired or replaced. Now they’re down to $400 so that was an option but wanted something easier and cheaper.

More recently on eBay found people offering to fix the Unregistered Pod issue for $500, also found a guy offering to repair connection problems for much less. This guy was great. I sent the pod to him, he did not fix the USB, but enabled the LAN RJ45 port and assigned a static IP address to access the device. This is the true answer for anyone who has a wiTECH, real or otherwise. It works so much better and faster with a direct IP connection rather than using the clumsy USB IP “fake network”

When my pod was returned, it worked perfectly with a crossover Ethernet cable, but I got locked out again. This gentleman was very helpful, said to go ahead with all the updates (15.xx + newest Adobe AIR) and then give him Teamviewer remote access. Watched as he transferred files and did whatever else to magically unlock the application so it worked with the newest version and while being online.

Been hoping to learn what and how he did this, and don’t mind paying for the information, just for my own use, have other computers have been working to replace my old netbook. Have no interest in taking advantage by cashing in on eBay. Have not heard back from him yet, and will not bug him about it either.

The newest version does not include the DRB emulator, I tried to run the program over the newer version but it did not work, “could not find VCI”. The pod does work on another laptop that still has 14.xx with the emulator included, so will leave that one alone for just that purpose, at least until hopefully find the way to have emulator work with 15.xx.

wiTECH-VCI-Pod

Then i decided to buy another, the site http://www.eobdii.fr/wholesale/chrysler-diagnostic-tool-witech-vci-pod.html

wiTECH-VCI-Pod-Review-7

wiTECH-VCI-Pod-Review-1

wiTECH-VCI-Pod-Review-2

wiTECH-VCI-Pod-Review-5

This time, it worked!!!!

Soooooooo relief!!!!!!!!!!!

Best Quality CAN Clip v169 for Renault Diagnostic Interface with Full Chip AN2135SC AN2136SC Multi-Languages

Best Quality CAN Clip v169 for Renault Diagnostic Interface with Full Chip AN2135SC AN2136SC Multi-Languages
Top 4 Reasons to Get Can Clip for Renault
1. Software Version: V169
2. Support Multi-Language: English, German, Danish, Spanish, Finnish, French, Italian, Norwegian, Dutch, Portuguese, Romania, Swedish
3. Update by CD
4. Best Price
Notice:

1. Operating System: Windows XP
2. Please Don’t Disassembly the Body Apart Yourself, Or We Won’t be Responsible for Repair
Can Clip for Renault Function:
1. See all the information relating to the vehicle
2. Computer test
3. Automatic test of all computers
4. Airbag test
5. Ccantool (OBD tests)
6. Base Doc (access to Technical Notes)
7. Physical measurements
8. Antipollution
9. Multimeter
Package includes:
1pc x Can Clip for Renalt
1pc x Renault 12Pin Cable
1pc x OBD II 16Pin Cable
1pc x USB Cable
1pc x CD(V69 Version)
If you want to this product,please enter this link:
http://www.eobdii.fr/wholesale/best-quality-interface-de-diagnostic-renault-can-clip-with-multi-language.html

Original Autel AutoLink AL619 OBDII CAN ABS And SRS Scan Tool Update Online Without Problems

Autel AutoLink AL619 abs/srs + CAN OBDII outil d’analyse de diagnostic

4 Faits saillants pour Get Autel Autolink AL619:
1.Supported Langue: Allemand Français Espagnol Portugais Polonais Italien Néerlandais Russe
La langue par défaut est l’anglais, après avoir reçu l’élément de nous, s’il vous plaît vous inscrire sur le site officiel Autel, et passe-moi numéro de série, nous allons changer la langue que vous voulez.
2. Couverture du véhicule: GM, Ford, Chrysler, Volvo, VW, BMW, Mercedes, Toyota, Honda, Nissan, Hyundai, Kia, Subaru, Mitsubishi, Citroën, Fiat,  Landrover, Jaguar.
3. Mise à jour en ligne
4. Fonctionne sur tous les 1996 et plus récents véhicules (OBDII & CAN)
Product description:
original-autel-autolink-al619-obdii-can-abs-and-srs-scan-tool-1
Altar AL619 clearly read ABS Land Rover codes without problems
Managed to finally get an altar analysis tool AL619 ABS / SRS / OBD2 after hearing from various sources on the forum that it will work for Land Rover ABS codes. We wanted to gather useful information for anyone interested in retrieving the tool. I am in no way affiliated with Altar or anything similar, I just wanted to convey my experiences to anyone interested in erasing their codes.It works well, and it works OK. Ordered from www.cardiag.co.uk for $ 110 (Amazon $ 120) on Monday and received it at the office today. Half an hour to be recorded with Altar, and then installed the updates available via the Micro-SD card included.

Passed to the car, plugged the AL619 into the OBD2 port, went through different menus and made my selections and within 3 minutes it showed my 4 ABS codes. Saved the information, erased the codes and down, and the light 3 amigos + BRAKE that lasted since December has gone. I still have to fix the causes, but I am more than satisfied with the immediate results.

Past the next minutes to disturb with the OBD2 function to find other faults and look at the image blocking data. Everything is very convenient and easy to follow.

I have only positive things to say. Previously, our only options when erasing ABS codes were to go to a dealer and spend $ 100 for each sweep, or increase transportation costs by $ 208 for the only unique Amigo ABS vehicle. Now, for only $ 110 shipped, we can have all the functions of the Amigo with the added function of scanning OBD2, live data, freezing, and so on. This really is a unique sweep for the LR owners. And for $ 108 less than the friend.

I do not brew the Amigo, it’s a cool unit that does its job, but I do not know how they will compete with an altar under $ 108 while offering much more in terms of versatility and functionality.

Thus, in the background line, the AL619 reads and erases the ABS LR codes without breaking the sweat. It was expensive, but now its price is falling and considering the fact that it runs on so many cars and the resale value is likely to be quite high – it is justified. I am a happy customer.

if you have interest in this product,please enter this link:
http://www.eobdii.fr/wholesale/original-autel-autolink-al619-obdii-can-abs-and-srs-scan-tool-2338.html

Autel AL619 lis clairement les codes ABS Land Rover sans problème

Géré pour enfin obtenir un outil d’analyse Autel AL619 ABS / SRS / OBD2 après avoir entendu de diverses sources sur le forum qu’il fonctionnera pour les codes Land Rover ABS. Nous voulions rassembler des informations utiles pour toute personne intéressée à récupérer l’outil. Je ne suis en aucun cas affilié à Autel ou à quelque chose de semblable, je voulais simplement transmettre mes expériences à toute personne intéressée à effacer leurs codes.

Il fonctionne bien, et ça marche BIEN. Commandé sur www.cardiag.co.uk pour 110 $ (Amazon 120 $) le lundi et l’a reçu au bureau aujourd’hui. Passé une demi-heure à être enregistré avec Autel, puis installé les mises à jour disponibles via la carte Micro-SD incluse.

Passé à la voiture, a branché l’AL619 dans le port OBD2, a traversé les différents menus et fait mes sélections et dans les 3 minutes il a montré mes 4 codes ABS. Sauvegardé l’information, effacé les codes et bas, et la lumière 3 amigos + BRAKE qui a duré depuis décembre a disparu. Je dois encore réparer les causes, mais je suis plus que satisfaite des résultats immédiats.

Passé les prochaines minutes à déranger avec la fonction OBD2 pour trouver d’autres défauts et regarder les données de blocage des images. Tout est très pratique et facile à suivre.

Je n’ai que des choses positives à dire. Auparavant, nos seules options lors de l’effacement des codes ABS étaient d’aller chez un concessionnaire et de dépenser 100 $ pour chaque balayage, ou augmenter les coûts de transport de 208 $ pour le seul véhicule ABS Amigo unique. Maintenant, pour seulement 110 $ expédiés, nous pouvons avoir toutes les fonctions de l’Amigo avec la fonction ajoutée de la numérisation OBD2, des données en direct, du gel, etc. C’est vraiment un balayage unique pour les propriétaires LR. Et pour 108 $ de moins que l’ami.

Je ne brasse pas l’Amigo, c’est une unité cool qui fait son travail, mais je ne sais pas comment ils pourront rivaliser avec un Autel de moins de 108 $ tout en offrant beaucoup plus en termes de polyvalence et de fonctionnalité.

Ainsi, en ligne de fond, l’AL619 lit et efface les codes ABS LR sans briser la sueur. C’était cher, mais maintenant son prix baisse et compte tenu du fait qu’il fonctionne sur tant de voitures et la valeur de revente est susceptible d’être assez élevée – il est justifié. Je suis un client heureux.

Pour plus d’informations, consultez ce lien

http://www.eobdii.fr/wholesale/original-autel-autolink-al619-obdii-can-abs-and-srs-scan-tool-2338.html

How to program Peugeot 307 key with Lexia 3?

How to program Peugeot 307 key with Lexia 3?

Prepared tool you will need:

1.Lexia-3 lexia3 V48 Citroen/Peugeot Diagnostic PP2000 V25 with Diagbox V7.53 Software
2.All the vehicles keys.
3.A laptop that contains Lexia3/ PP2000 software.
4.Confidential code

Procedure of how to program Peugeot 307 key:

Step 1. Open up Peugeot PP2000 Diagbox software, select vehicle model “307” and click “OK” button at the bottom right. The PP2000 diagnostic software will start searching for the 307 car.

Step 2. Hook up Lexia3 PP2000 interface to the laptop and the OBD port of the car. Turn on the ignition. PP2000 will build connection with the car within a few seconds.

Step 3. Confirm vehicle information, including its VIN code, motor, chassis number and body. If the vehicle info is right, click “OK” to continue.

Step 4. Select application as “Peugeot Planet 2000”.

lexia3-pp2000-peugeot-307-key-1

Step 5. Select “Test by ECU”.

Step 6. Select “Built-in systems interface”.

Step 7. Select “Learning” to get car key information.

Step 8. Select “Programming of keys”.

lexia3-pp2000-peugeot-307-key-2

Step 9. Follow the prompts in picture below.

lexia3-pp2000-peugeot-307-key-3

Step 10. A few seconds later you will get this window. Enter the Confidential code located on your confidential card. Verification of the confidential code will then start. If the confidential code is correct, the built-in system interface will ready for programming the key

Step 11. Enter the number of keys that you want to learn. At most 5 keys can be programmed. Here I will replace only one key.

Step 12. Switch off the ignition.
Step 13. Use the blank key to switch on the ignition positive
Step 14. You will get a message “Key programmed. Switch off the ignition and take out the key” when a new key is successfully programmed.

lexia3-pp2000-peugeot-307-key-4

VDM UCANDAS WIFI Full System Automotive Diagnostic Tool tested on BMW X5 E53

VDM UCANDAS WIFI Full System Automotive Diagnostic Tool tested on BMW X5 E53

VDM UCANDAS Covers 47 Car Models:
European Car Models: Audi, Benz, BMW, Citroen, Fiat, Ford EU, Jaguar, Lancia, LandRover,
MINI, Opel, Peugeot, Porsche, Renault, Saab, Seat, Skoda, Smart, Vauxhall, Volvo, VW.
Asia Car Models: Acura, Honda, Hyundai, Infiniti, Isuzu, Kia, Lexus, Mazda, Mitsubishi, Nissan,
Perodua, Proton, Subaru, Suzuki, Toyota
Asutralia Car Models: Ford AU, Holden
USA Car Models: Chrysler, Ford, GM.
China Car Models: Chery, Geely, GWM

Diagnostic Kit: VDM Ucandas WIFI interface
Tested windows system: Win 7 64 bit
Tested vehicle model: BMW X5 E53

Starting:
First of all, well load VDM UCANDAS software on laptop.

VDM interface allows us to connect via both USB and WIFI. Here we directly connect the interface with vehicle via OBD2 socket using USB main test cable. The interface indicator light turn green means well communication is built between the vehicle and the diagnostic system.

vdm-ucandas-bmw-x5-1

Go to the computer. Mount “UCANDAS” software icon on the desktop and run software.

vdm-ucandas-bmw-x5-2

Go to “Settings” and click on “Link Mode” to check the connection, we are allowed modify the SSID (blue shadow area) and click on the “Connect” button on the right bottom to set a new SSID.

vdm-ucandas-bmw-x5-3

Select vehicle region, make, model etc, here follow this way: EUROPEAN-> vehicle make: BMW->X Series->X5 E53

vdm-ucandas-bmw-x5-4vdm-ucandas-bmw-x5-5vdm-ucandas-bmw-x5-6

Come to Main function menu. Select certain control unit, e.g. Drive.

vdm-ucandas-bmw-x5-7

Run a Quick test and check all stored fault codes in control units.
In the left program we will be able to view some control modules, DME, EGS, EWS immo etc, and value /short description to the fault code on the right.

vdm-ucandas-bmw-x5-8

There is a “Quick delete” button which allow to erase fault codes by a quickly press.

vdm-ucandas-bmw-x5-9

Go for some Special function test, different models may have different special function options, here is the X5 E53 special functions list.

vdm-ucandas-bmw-x5-10

For example, two special functions: Clear adaptations and CO adjustment offered under Digital Mortify Electronics module. Select specific one and follow the UCANDAS prompt.

vdm-ucandas-bmw-x5-11

Find the VDM UCANDAS from: http://www.eobdii.fr/wholesale/ucandas-wireless-automotive-diagnosis-system.html.

Which is better? AUTEL MaxiSYS MS906 Scanner VS Autel MaxiDAS DS708 Scanner

AUTEL MaxiSYS MS906 Scanner VS Autel MaxiDAS DS708 Scanner

AUTEL MaxiSYS MS906 Scanner is a new tool developed by Autel company. This one is better to use than the Autel MaxiDAS DS708 series. Check the differences list from:

Item Name AUTEL MaxiSYS MS906 Scanner Autel MaxiDAS DS708
Appearance
Brand Autel Autel
Language English,Spanish,French,German,
Japanese,Portuguese
One device can only support English plus another one language( French,German,Portuguese,Spanish and so on.)
Update Online Update Free for 1 Year Online Update Free for 1 Year
Need PC NO NO
OS Android 4.0 Operating System Windows CE operating system
Support Cars Most of the European, Asian, Amercian cars Most of the European, Asian, Amercian cars
Programming No No
ECU coding No No
Memory Memory 2GB RAM & 32GB On-board Memory Max. 4 Gigabyte SD card
Attention: 1. Autel MS906 work function better than DS708 with fast run speed.2. The AUTEL MaxiSYS Pro MS908P can support the online ECU coding and online programming.  (Compatiable online programming for part of the original software)

VPECKER Easydiag V6.8 Version Updated Newer Oilreset Car Model

VPECKER Easydiag V6.8 Version Updated Newer Oilreset Car Model

As is known to all, the VPECKER Easydiag Wireless OBDII Full Diagnostic Tool can not only do the diagnose function, but also the oilreset. The Newest version V6.8 for the VPECKER Easydiag updated the more support car model for the oilreset function. Check the part of the list now:

vpecker-easydiag-oilreset-1

vpecker-easydiag-oilreset-2vpecker-easydiag-oilreset-3vpecker-easydiag-oilreset-4vpecker-easydiag-oilreset-5

See the whole car model list for oilreset from: http://www.eobdii.fr/upload/pro/201602/vpecker-easydiag-diagnostic-tool-updated-oilreset-model-list.pdf.