Nissan Qashqai 2016 smart card key programming is the same as new X-tail. Both has 20-digit BCM code. Original Nissan Qashqai key use special 2-button 315MHz no chip smart key. SKP1000 key programmer will program smart card for this model without BCM code.
(CI600 Plus the Chinese version of SKP1000)
2016 Qashqai BCM Type 284B1-4BY5A is different from X-tail, but they have same immobilizer system
Connect SKP-1000 key programmer with vehicle via OBD socket
Select Immobilizer->Nissan->2013-Nissan X-tail smart card (Auto read BCM code)
Select OBDII connector
Turn Ignition to ON position
Press YES to continue
Configuring the system….
Select Program Smart Card
Turn ignition OFF
Turn on emergency switch (Shown as picture below)
Remove all keys
Maximum 4 keys can be programmed
Press YES to continue
SKP1000 will read BCM code automatically, then start to program smart card. This will delete all smart card.
Press the vehicle engine Start button once
Attach the smart card to the Start button within 5 seconds
Dashboard turns on, immo indicator flashes for 5 times
Press YES to continue
Follow procedure above to program next smart card
