How to do component test with Autel MOT Pro EU908?

How to do component test with Autel MOT Pro EU908?

The Component Test function allows initiating a leak test for the vehicle’s EVAP system. The scan tool itself does not perform
the leak test, but commands the vehicle’s on-board computer to start the test. Different vehicle manufacturers might have
different criteria and methods for stopping the test once it has been started. Before starting the Component Test, refer to the
vehicle service manual for instructions to stop the test. You can see the Autel MOT Pro EU908 component test operation from

1) Use the UP/DOWN scroll button to select Component Test from Diagnostic Menu and press the OK button.
2) Wait for the scan tool to display the Component Test menu.

3) If the test has been initiated by the vehicle, a confirmation message will be displayed on the screen.

* Some vehicles do not allow scan tools to control vehicle systems or components. If the vehicle under test does not support the
EVAP Leak Test, an advisory message is displayed on the screen.

4) Press any key to return to previous screen.

Autel MOT Pro EU908 Scanner: