Category Archives: Soutien technique

Difference between PTT official version and Basic version

Volvo PTT tech tool offical version is the update version of the basic version.

And there is a difference between this two version

Official version include all functions of the basic version and it also support version 3 and 4. Version 3 and 4 is for the newer car models.

But the basic version only support version 2 and version 2 is for the older models

Official version include the following software.

1. Dev2tool (for programming parameters version 2 – older trucks)
2. Developer tool Plus(Acpi+) (for programming parameters version 3 and 4 – newer trucks)
3. Visfeed + Xml Editor
4. Volvo/ IS File Encryptor/Decryptor
5. Volvo Traing Files (Flash, PDF,Video) 3gb

SUPER MB STAR Software Platinum Edition D630/X61T/CF30/External HDD Activation Steps

V2015.09 SUPER MB STAR Software Platinum Edition D630/X61T/CF30/External HDD
Work with all benz cars, trucks from 1981 to 2013.
Compatible with Super MB Star c3 or MB SD Connect 4.
Support one time free SCN Coding
Hard disk capacity: 160G

But  how to active it ?The following is the steps to tell

Send to us this
Hardware ID XXXX-XXXX-XXXX-XXXX-XXXX-XXXX-XXXX-XXXX
LAN-ID XXXXXXXXXXXX
HW-ID XXXXXXXXXXX APPID XXX

XENTRY

xentry

COPY HW-ID:XXXXXXXXXXXX & APP-ID:XXX r

xentry-1

xentry-2

xentry-3

xentry-4

xentry-5

xentry-6

Run Xentry

run-xentry

run-xentry-1
EPC

epc

epc-1

epc-2

COPY LAN-ID:XXXXXXXXXXXX to our dealer

lan-id

lan-id-1

lan-id-2

lan-id-3

lan-id-4

lan-id-5

lan-id-5

lan-id-6

lan-id-7

How to program Peugeot 307 key with Lexia 3?

How to program Peugeot 307 key with Lexia 3?

Prepared tool you will need:

1.Lexia-3 lexia3 V48 Citroen/Peugeot Diagnostic PP2000 V25 with Diagbox V7.53 Software
2.All the vehicles keys.
3.A laptop that contains Lexia3/ PP2000 software.
4.Confidential code

Procedure of how to program Peugeot 307 key:

Step 1. Open up Peugeot PP2000 Diagbox software, select vehicle model “307” and click “OK” button at the bottom right. The PP2000 diagnostic software will start searching for the 307 car.

Step 2. Hook up Lexia3 PP2000 interface to the laptop and the OBD port of the car. Turn on the ignition. PP2000 will build connection with the car within a few seconds.

Step 3. Confirm vehicle information, including its VIN code, motor, chassis number and body. If the vehicle info is right, click “OK” to continue.

Step 4. Select application as “Peugeot Planet 2000”.

lexia3-pp2000-peugeot-307-key-1

Step 5. Select “Test by ECU”.

Step 6. Select “Built-in systems interface”.

Step 7. Select “Learning” to get car key information.

Step 8. Select “Programming of keys”.

lexia3-pp2000-peugeot-307-key-2

Step 9. Follow the prompts in picture below.

lexia3-pp2000-peugeot-307-key-3

Step 10. A few seconds later you will get this window. Enter the Confidential code located on your confidential card. Verification of the confidential code will then start. If the confidential code is correct, the built-in system interface will ready for programming the key

Step 11. Enter the number of keys that you want to learn. At most 5 keys can be programmed. Here I will replace only one key.

Step 12. Switch off the ignition.
Step 13. Use the blank key to switch on the ignition positive
Step 14. You will get a message “Key programmed. Switch off the ignition and take out the key” when a new key is successfully programmed.

lexia3-pp2000-peugeot-307-key-4

MINI VCI FOR Toyota TIS Techstream V10.30.029 Installation!

MINI VCI FOR Toyota TIS Techstream V10.30.029 Installation!

Techstream cable: The software interface supports Techstream (Mangoose VCI, MINI VCI with 16 pin cable, Mini VCI 22-PIN, Xhorse MVCI etc) for Toyota, Scion and Lexus makes.
Language: Chinese/English/French/German/Indian/Japanese/Spanish
Software Version: V10.30.029

1)Intall Tecshtream Setup

Open software CD or download Toyota Techstream software
Open and install Toyota Techstream 10.30.029 setup

mini-vci-for-toyota-tis-software-installation-1
Select software setup language,click Next

mini-vci-for-toyota-tis-software-installation-2
Click Next
Accept license agreement
Click Next
Enter User Name and Company Name,click Next

mini-vci-for-toyota-tis-software-installation-3
Click Install
Click Finish when installshiled wizard complete

2) Install software driver

Open software folder
Install MVCI Driver for TOYOTA

mini-vci-for-toyota-tis-software-installation-4
Click Next
Click Finish when complete the MVCI for Toyota TIS Setup
Copy MainMenu Application on software folder
Right click Techstream software on desktop
Click Find Target, paste and replace the MainMenu Application file on the bin folder

mini-vci-for-toyota-tis-software-installation-5
Connect the Toyota Techstream cable to the vehicle and then install device driver
Open Tecshtream software on desktop
Click No
Launch software
Click Setup tab->Techstream Configuration
Select Area

mini-vci-for-toyota-tis-software-installation-6
Select software language

mini-vci-for-toyota-tis-software-installation-7

3) Register/Activate TIS Techstream

Click Connect to Vehicle function button on the left, the system will require to enter registration key
Open “serie” Notepad on software folder

mini-vci-for-toyota-tis-software-installation-8
Copy and paste the key to New key column

mini-vci-for-toyota-tis-software-installation-9
Click OK
Initializing USB Communication
Select vehicle information

mini-vci-for-toyota-tis-software-installation-10
Select engine module and the function you want to carry out

mini-vci-for-toyota-tis-software-installation-11mini-vci-for-toyota-tis-software-installation-12

VDM UCANDAS WIFI Full System Automotive Diagnostic Tool tested on BMW X5 E53

VDM UCANDAS WIFI Full System Automotive Diagnostic Tool tested on BMW X5 E53

VDM UCANDAS Covers 47 Car Models:
European Car Models: Audi, Benz, BMW, Citroen, Fiat, Ford EU, Jaguar, Lancia, LandRover,
MINI, Opel, Peugeot, Porsche, Renault, Saab, Seat, Skoda, Smart, Vauxhall, Volvo, VW.
Asia Car Models: Acura, Honda, Hyundai, Infiniti, Isuzu, Kia, Lexus, Mazda, Mitsubishi, Nissan,
Perodua, Proton, Subaru, Suzuki, Toyota
Asutralia Car Models: Ford AU, Holden
USA Car Models: Chrysler, Ford, GM.
China Car Models: Chery, Geely, GWM

Diagnostic Kit: VDM Ucandas WIFI interface
Tested windows system: Win 7 64 bit
Tested vehicle model: BMW X5 E53

Starting:
First of all, well load VDM UCANDAS software on laptop.

VDM interface allows us to connect via both USB and WIFI. Here we directly connect the interface with vehicle via OBD2 socket using USB main test cable. The interface indicator light turn green means well communication is built between the vehicle and the diagnostic system.

vdm-ucandas-bmw-x5-1

Go to the computer. Mount “UCANDAS” software icon on the desktop and run software.

vdm-ucandas-bmw-x5-2

Go to “Settings” and click on “Link Mode” to check the connection, we are allowed modify the SSID (blue shadow area) and click on the “Connect” button on the right bottom to set a new SSID.

vdm-ucandas-bmw-x5-3

Select vehicle region, make, model etc, here follow this way: EUROPEAN-> vehicle make: BMW->X Series->X5 E53

vdm-ucandas-bmw-x5-4vdm-ucandas-bmw-x5-5vdm-ucandas-bmw-x5-6

Come to Main function menu. Select certain control unit, e.g. Drive.

vdm-ucandas-bmw-x5-7

Run a Quick test and check all stored fault codes in control units.
In the left program we will be able to view some control modules, DME, EGS, EWS immo etc, and value /short description to the fault code on the right.

vdm-ucandas-bmw-x5-8

There is a “Quick delete” button which allow to erase fault codes by a quickly press.

vdm-ucandas-bmw-x5-9

Go for some Special function test, different models may have different special function options, here is the X5 E53 special functions list.

vdm-ucandas-bmw-x5-10

For example, two special functions: Clear adaptations and CO adjustment offered under Digital Mortify Electronics module. Select specific one and follow the UCANDAS prompt.

vdm-ucandas-bmw-x5-11

Find the VDM UCANDAS from: http://www.eobdii.fr/wholesale/ucandas-wireless-automotive-diagnosis-system.html.

Which is better? AUTEL MaxiSYS MS906 Scanner VS Autel MaxiDAS DS708 Scanner

AUTEL MaxiSYS MS906 Scanner VS Autel MaxiDAS DS708 Scanner

AUTEL MaxiSYS MS906 Scanner is a new tool developed by Autel company. This one is better to use than the Autel MaxiDAS DS708 series. Check the differences list from:

Item Name AUTEL MaxiSYS MS906 Scanner Autel MaxiDAS DS708
Appearance
Brand Autel Autel
Language English,Spanish,French,German,
Japanese,Portuguese
One device can only support English plus another one language( French,German,Portuguese,Spanish and so on.)
Update Online Update Free for 1 Year Online Update Free for 1 Year
Need PC NO NO
OS Android 4.0 Operating System Windows CE operating system
Support Cars Most of the European, Asian, Amercian cars Most of the European, Asian, Amercian cars
Programming No No
ECU coding No No
Memory Memory 2GB RAM & 32GB On-board Memory Max. 4 Gigabyte SD card
Attention: 1. Autel MS906 work function better than DS708 with fast run speed.2. The AUTEL MaxiSYS Pro MS908P can support the online ECU coding and online programming.  (Compatiable online programming for part of the original software)

How to solve the BMW ICOM A2+B+C Diagnostic Tool software not compatible with the firmware problem?

How to solve the BMW ICOM A2+B+C Diagnostic Tool software not compatible with the firmware problem?

Why my newest BMW ICOM software can not work with my BMW ICOM A2+B+C Diagnostic Tool interface?  My BMW ICOM software is V2015.12.
There are many error showed after I inserted the software HDD. Please check the picture bellow.

bmw-icom-a2-b-c-firmware-error-1

bmw-icom-a2-b-c-firmware-error-2

bmw-icom-a2-b-c-firmware-error-3

For new software, when you run the software, software will recognize the firmware automatically. If your firmware is too old, then it will not be compatible with latest software. You can learn how to update the BMW ICOM A2+B+C firmware from: http://blog.eobdii.fr/bmw-icom-a1-or-a2-v01-40-05-firmware-update-steps/.

Genius and Flash Point ECU Chip Tuning Tool TF Card Reset Procedure

Genius and Flash Point ECU Chip Tuning Tool TF Card Reset Procedure

Sometimes, you may find that the file side the Genius and Flash Point ECU Chip Tuning Tool TF Card ruined. Then you will need to fix the file of the TF card. This video is to fix the TF card file for the Genius & Flash K-touch ECU Tool.

Tips1: You only can use the TF card from a complete set of the Genius. Do not use the TF card bought from the local market.
Tips2: Before fixing, you need to format the TF card.
Tips3: The k-touch.img fixing file must be in disk D or disk E. Do not put the k-touch.img in the file of the disk D or disk E.

Tips for VVDI2 Commander Key Programmer Full Version

Tips for VVDI2 Commander Key Programmer Full Version

VVDI 2 includes all the VVDI functions, the function of Tango. And this one is the newest hotsellers of the Xhorse company. When the software showed that “Remaining Synchronization Time:1 days”. You just need to ingnore this. Because it does not affect the usage of the VVDI2 Commander Key Programmer functions.

xhorse-vvdi2

Tacho Pro 2008 July PLUS Universal Mileage Change on Audi Model A4 Bosch model 2001 clip

Tacho Pro 2008 July PLUS Universal Mileage Change on Audi Model A4 Bosch model 2001 clip

tacho-pro-a4-bosch-model-2000-1

Use this board and clip:tacho-pro-a4-bosch-model-2000-2

Prepare this Tacho Pro:
Tacho Pro 2008 July PLUS Universal

• Remove the cluster and open it.

tacho-pro-a4-bosch-model-2000-3
• Pull off the needles for speed and rpm

tacho-pro-a4-bosch-model-2000-4
• Look for the 8 pin chip 24C08.

tacho-pro-a4-bosch-model-2000-5
• Connect the clip to Port 3.
• Put the clip on the chip 24C08 (red on pin 1).
• Select the menu Audi-A4-A4 24C08
• The Tacho Universal shows you the old value.
• Select the menu Adjust KM.
• Enter the new value.
• Verify the new value with OK.