Monthly Archives: November 2015

BENZ STAR C3 Super Mb star V2015.9 Updated with SDNC and Self-test Fix Function!

BENZ STAR C3 Super Mb star V2015.9 Updated with SDNC and Self-test Fix Function!

Super MB Star is a new version of Mercedes Benz diagnostic tool. It covers Benz cars from 1989 and it can be updated in the end of customer side. The newest software version updated to V2015.9.

This fix is for SUPER MB STAR C3 2015-9 Bugs:

1. Fix the SDNC C3 icon does not display after you connect Super MB STAR C3 hardware.
2. Fix the self-test function in star utilities can not start.
NOTICE:
A: This fix is for SUPER MB STAR C3 2015-9 Software ONLY!!
B: The password for the software installation is 123133322.

How to register XTOOL X-100 PAD Tablet Key Programmer with EEPROM Adapter?

How to register XTOOL X-100 PAD Tablet Key Programmer with EEPROM Adapter?

XTOOL X-100 PAD Tablet Key Programmer not only provides customers with professional key programming, but also the most needed special functions for workshop. Today we will show you how to register.

1. Connect the XTOOL X-100 PAD with internet.
2. Enter the XTOOL X-100 PAD screen like the picture bellow.

xtool-x-100-pad-register-1
3. File the Data. The activate code is wroten on the user manual.

xtool-x-100-pad-register-2
4. Click activate.

xtool-x-100-pad-register-3
Attention:

a: Please use the email address as the log in account.
b: Do not forget your password for logging in.

Free Gift plus 6% Storewide Discount for Thanksgiving, Stock Up Now!

Free Gift plus 6% Storewide Discount for Thanksgiving, Stock Up Now!

The promotion will start from 18th Nov to 2nd Dec.

6% Coupon Code: thanks. 

thanks-giving-eobdtool

If you order above 150EUR, you can choose one free gift from:

V2014.3 Multidiag Pro+/DS150 Software CD  

Attention: Once your order is over 150EUR, I will contact you to confirm the free gift. Any question, contact sales@eobdii.fr.

SuperOBD SKP-900 Hand-held OBD2 Auto Key Programmer to do All Keys Lost Tested Model

SuperOBD SKP-900 Hand-held OBD2 Auto Key Programmer to do All Keys Lost Tested Model

As we have mentioned, the SuperOBD SKP-900 Hand-held OBD2 Auto Key Programmer can support all keys lost programming. Today we shared the all keys lost tested model for you to check.

Here is for USA cars

2013 CHRYSLER 200 – WORKS FINE
2008 DODGE CHARGER – WORKS FINE
2013 FORD EDGE – WORKS FINE
2011-2013 FORD F-150 – WORKS FINE
2013 MUSTANG – WORKS FINE

2012 JEEP COMPASS – WORKS FINE
2008 JEEP WRANGLER – WORKS FINE
2014 KIA RIO – WORKS FINE
2013 KIA SOUL – WORKS FINE
2013 KIA FORTE – WORKS FINE

2009 TOYOTA CAMRY – WORKS FINE, REMOTE + TRANSPONDER SEPERATE PROCEDURE BOTH WORKS
2012-2013 TOYOTA CAMRY – WORKS FINE, REMOTE + TRANSPONDER SEPERATE PROCEDURE BOTH WORKS
2013 TOYOTA HIGHLANDER – WORKS FINE, REMOTE + TRANSPONDER SEPERATE PROCEDURE BOTH WORKS

2002 VOLKSWAGEN GTI – WORKS FINE

2005 – NISSAN 350Z – WAS ABLE TO PULL BCM BUT COULD NOT PROGRAM KEY. I THINK JUST NEED TO PLAY WITH IT LONGER.

2013 FORD FOCUS – DOES NOT WORK
2014 FORD FIESTA – DOES NOT WORK

From the tested model, you can check if your car model is supported. More question, contact sales@eobdii.fr.

SuperOBD SKP-900 Auto Key Programmer: http://www.eobdii.fr/wholesale/superobd-skp-900-hand-held-obd2-auto-key-programmer.html

I-2014 Multi-Diag Access J2534 Pass-Thru Software Free Share!

I-2014 Multi-Diag Access J2534 Pass-Thru Software Free Share!

As the newest version for the multi-diag j2534 series, the I-2014 Multi-Diag Access J2534 Pass-Thru software may can not run sometimes. Today we share the free software download.

http://www.chinaautodiag.com/download/multi-diag-access-j2534-2014-1-part01.zip
http://www.chinaautodiag.com/download/multi-diag-access-j2534-2014-1-part02.zip
http://www.chinaautodiag.com/download/multi-diag-access-j2534-2014-1-part03.zip
http://www.chinaautodiag.com/download/multi-diag-access-j2534-2014-1-part04.zip
http://www.chinaautodiag.com/download/multi-diag-access-j2534-2014-1-part05.zip
http://www.chinaautodiag.com/download/multi-diag-access-j2534-2014-1-part06.zip
http://www.chinaautodiag.com/download/multi-diag-access-j2534-2014-1-part07.zip

By following next steps to correctly unzip file parts.
Step 1: download all parts
Step 2: choose all .zip parts, right click and unzip to current folder
Step 3: choose all .rar parts, right click and unrar to a folder.
Step 4: you can check all files in a new folder.

Tips: Close the anti-virus software. Please note,anti-virus software can flag up this product software as having a virus.

Tacho Pro 2008 July PLUS Universal odometer correction on Ford Focus Step by Step

Tacho Pro 2008 July PLUS Universal odometer correction on Ford Focus Step by Step

Tacho Pro 2008 July PLUS Universal is one French favorite device to do mileage correction. It can do multi-brand cars than the other tool. See the procedure to do on Ford Focus bellow:

Use the Scorpio plug:

tacho-pro-2008-july-on-ford-focus-1

26pin white port
• Pin 2      GND(-)          black
• Pin 9      RX (Data)     blue
• Pin 11   TX (Data)     yellow
• Pin 14   12V (+)          red
• Pin 16   12V (+)         red

Processor version 1:
• Connect Pin 1 ( left side down) and pin 2 (right from pin 1), or connect black to test point 3 (TP3).

tacho-pro-2008-july-on-ford-focus-2tacho-pro-2008-july-on-ford-focus-3

Processor version 2:
• Connect pin 1 (middle upside) and pin 2 (left beside pin 1), or connect black to testpoint 46 (TP46).

tacho-pro-2008-july-on-ford-focus-4
• Remove the cluster and open it.
• Connect the cables as shown in the picture.
• Select the menu Ford-Focus
• The Tacho Pro 2008 July PLUS Universal shows you the old value.
• Enter the new value.
• Verify the new value with OK.

AUTEL MaxiSys Elite with J2534 ECU Preprogramming Box VCI Firmware Update

AUTEL MaxiSys Elite with J2534 ECU Preprogramming Box VCI Firmware Update

The Update section is applied for updating the VCI firmware via the Internet through the MaxiSys tablet connection. Before updating the VCI firmware, please make sure the MaxiSys tablet network connection is stable.

To update the VCI device software

1. Power on the MaxiSys display tablet.
2. Connect the VCI device to MaxiSys tablet via USB.
3. Tap the VCI Manager application on the MaxiSys Job Menu of the
display tablet.
4. Select Update from the connection mode list.
5. The current version number and the latest version number of the VCI software will be displayed after a few seconds, click Update. Now to update the VCI software if available.

How to do component test with Autel MOT Pro EU908?

How to do component test with Autel MOT Pro EU908?

The Component Test function allows initiating a leak test for the vehicle’s EVAP system. The scan tool itself does not perform
the leak test, but commands the vehicle’s on-board computer to start the test. Different vehicle manufacturers might have
different criteria and methods for stopping the test once it has been started. Before starting the Component Test, refer to the
vehicle service manual for instructions to stop the test. You can see the Autel MOT Pro EU908 component test operation from
bellow.

1) Use the UP/DOWN scroll button to select Component Test from Diagnostic Menu and press the OK button.
2) Wait for the scan tool to display the Component Test menu.

autel-mot-pro-eu908-component-test-1
3) If the test has been initiated by the vehicle, a confirmation message will be displayed on the screen.

autel-mot-pro-eu908-component-test-2
* Some vehicles do not allow scan tools to control vehicle systems or components. If the vehicle under test does not support the
EVAP Leak Test, an advisory message is displayed on the screen.

autel-mot-pro-eu908-component-test-3
4) Press any key to return to previous screen.

Autel MOT Pro EU908 Scanner: http://www.eobdii.fr/wholesale/autel-mot-pro-eu908-scanner.html.

Why to check the software driver after installation?

Why to check the software driver after installation?

Most of the customers may have the problem with the OBD2 device software installation. Once the problem showed, the first you need to check is the software driver. Why? Because the software driver is one kind of the mark to check if the software installation completed.

Today, we will show you where to check the I-2014 Multi-Diag Access J2534 Pass-Thru OBD2 driver.

Open the computer management. Then see if there is one driver like the picture showed. If it has, it means that your software installation is right and you can use the device.

driver

Si vous voulez obtenir la clé d’activation pour mb star, vous devez trouver l’ID

Certains clients peuvent avoir le problème pour l’utilisation de produits mb étoiles.

En fait, ils sont très bons produits.

Lorsque vous activez ce succès, vous pouvez l’utiliser sans problème.

Le problème est l’activer. Maintenant, nous fournissons les étapes pour activer.

Vous pouvez le suivre.

epc-1-pic

epc-2-pic

epc-3-pic

epc-4-pic

lan-id-5-pic