Tag Archives: vag scanner

VAG CAN PRO VCP 5.5.1 Review

vag-can-pro-can-bus-uds-k-line-vcp-scanner-a1-620x264

I have in my hand for testing purposes vag can pro 5.5.1 (SP275) with QC mark.. Not sure if I will use it since I have already enabled keyless entry. That was the purpose of purchasing it but after I managed to flash with obdlink SX usb and SRT can-connect russian program it is a feature I will not test. The other reason was to get the radio concert 0350 firmware but clone version does not come with this, only original has it.

(RG3_ECE_0350.sgo (or the rar container RG3_ECE_0350.rar)
It was bought for self usage but it will remain in my luggage of not used diagnostics unless it is needed in the future. Also testing to see complexity and if it is worth to buy original.

It comes with the zdc file for enabling keyless entry and many other zdc parameters which I have no clue what they do. I have used VCDs for enabling all other options. VCDs can not flash or activate new parameters which are disabled in firmware.

Not sure if it can unlock used control units.

It can flash firmware (e.g. .sgo) but I know that vas5054a with Odis engineering is quicker. Also flash option is not available with VCDs.

It can function with and without usb dongle by replacing 2 DLLs. It needs usb dongle if dll files are not replaced.

Please post your questions and experience regarding this clone.

The original is much better, supported, tested, can download zdc and firmware through the manager app, and has version 8. The original VCP price is not bad (though postage cost is high), so I recommend it compared to VAS5054a however it can be used to complement VCDs i.e. to be used as an add on but not as a VCDs replacement.

Best value / usage (all perform the same as diagnostic)
1. VCDs (best for coding)
2. VCP (price similar to VCDs)
3. VAS5054a

Best for flashing firmware
1. VAS5054a
2. VAG CAN PRO VCP

Best for calibrations:
1. Vas5054a
2. VCDs/VCP (VCP has some service functions automated with one click OCF)

Best for activating keyless entry
1. SRT can-connect (has more features which I have not tested). I will create a new thread on this.
2. VCP (not tested but I believe I know how, seems more complex since you have to select all 8 parameters for flashing, coupe 2 door vs 4 door selection)

VAS5054a cannot enable keyless entry even even with Odis engineering. Tried to save current parameters to see if I can modify keyless but in almost every control module it asks for a security code, so I cannot save existing parameters.

Unlocking control units:
1. VCP???? Not tested but if it does it should be complex. First in case it does support this.
2. Vas5054a (Audi dealer)

VCP can add other parameters such as VIM but I only have radio concert so I cannot test this function. Can connect has some functions that resemble VCP or VCDs (but automated).

NOTE:
VAS5054a used with odis-S or odis-E
Odis-E can fix failed flash of control units unlike odis-S. I believe VCP has same capability since it can flash offline

VAG Vehicle Diagnostic Interface VVDI Customer Feedback FAQ

VAG Vehicle Diagnostic Interface VVDI Customer Feedback FAQ

About Language

Q: Is VVDI only available with English? I want French.
A: “ImmoPlus” has no French, it only has English and Chinese, and “VAG Commander Software” has French.

About Update

Q: How to update VVDI China VAG Vehicle Diagnostic Interface?
A: 1) VVDI Hardware update: use the upgrade tool “Commander Immo Plus” (please contact us to send you) to find out the Serial Number and then send it us, after we complete update, we will send you the updating software, after receiving the software, import it into “commanderupdate v1.3” to update hardware.
2) VVDI software update: once we have the newest version software, we will add the download link at the VVDI description page and remark the additional features.

About Installation

Q1: I can’t connect with the interface VVDI I don’t know what happened but doesn’t connect
A1: Please click column “Video” to watch the Video tutorial, it is about how to connect the VVDI with the computer and the car, and how to install the VVDI driver.

vag-vehicle-diagnostic-interface-vvdi-eobdtoolfr-1

Q2: VVDI got error reading “unable to connect to device”, then I use another computer, got the same error, the serial port is Ok.
A2: Please check VVDI driver is successfully installed, have no idea on how to install VVDI driver, please watch the video tutorial uploaded at the column “Video”.

About Function

Q1: What’s similarities and difference between VAG KM + IMMO TOOL or VVDI China VAG Vehicle Diagnostic Interface?
A1: VVDI support making key for VW Audi Skoda Seat, VAG KM + IMMO TOOL is mainly used to correct mileage, but before buy it you need to tell us the dashboard chip type to see whether our tool work with your dashboard.

Q2: Can VVDI support programmer transponder id48 crypto VW golf v 2007?
A2: Theoretically, VVDI can do, advice you have a try.

Q3: Can VVDI make new key for Polo 2012 even all key lost? Can VVDI program ECU?
A3: Yes, VVDI can make key for Polo 2012 even all key lost with “IMMOPlus software”, and VVDI is not good at programming ECU for Polo 2012.

Q4: What can make a copy of a key for a Audi A4 2006
A4: There is no good tool for it and maybe you can try for VVDI.

Q5: Which tool can make key and has anti-theft function for VW (Polo, Golf) or Audi (A4, A3, A6)?
A5: Try to use VVDI.

Q6: I wonder if VVDI le pin code of the immobilizer and writes the key and remote control on 2009 Jetta a / t leandro
A6: It can read pin code. As for programming key for Jetta 2009, try to use T300 or VVDI.

Q7: I’m involved in a project that consists in a clustar swap. We have an VW EOS 2008 with a micronas dash and we want to swap the clustert with a VW EOS 2010 NEC dash (I’m not sure if NEC24C64 or NEC24C32).Although the wiring is different we were able to connect the new cluster, and it seems to work OK. Problems start with the immo ….. We think that if we had the PINCODE/SKC from both clusters we would be able to match the new cluster with the ECU (and we would be able to match the keys). So I’d like to know if the software VAG KM+IMMO is able to get the PIN CODE of this cluster. I know your ad says it car read/write the EEPROM, it can correct the mileage, but is it able to help me in any way??? Thanks
A7: Please note that VAG KM+IMMO can read PIN CODE. If your car’s dash type is NEC24C32, you can directly use VAG KM+IMMO tool; if it is NEX24C64, you have to buy one “NEC24C64 Update Module for VAG KM + IMMO TOOL” to use with VAG KM + IMMO TOOL.

vag-vehicle-diagnostic-interface-vvdi-eobdtoolfr-2

Q8: I need to know if you could update China VVDI, I’m interested in the last version, I bought you this item but he version is 8.6, Could you do it? Thanks so much.
A8: yeah, please free download: http://www.eobdii.fr/wholesale/vag-vehicle-diagnostic-interface-vvdi-644.html.

Q9:I wonder if this le pin code of the immobilizer and writes the key and remote control on 2009 Jetta a / t leandro
A9: It can read pin code. As for programming key for Jetta 2009, we suggest you choose vas 5054a.

vag-vehicle-diagnostic-interface-vvdi-eobdtoolfr-3

Q10: I’m interested in VVDI China VAG Vehicle Diagnostic Interface, but I need to know if it updating, and if it have a user manual, I need to know how it works, and the better, could you please give me the better price , and I need a small case for this. thanks so much,
A10: It always have updating for IMMO Plus software.

Q11: I need to know if China VVDI modify VIN, and read PIN for a Tiguan model 2010 or Bora 2010 thanks so much
A11: It can change VIN code. So far, VVDI can’t read pin code for Tiguan model 2010 and Bora 2010. But we will have the newest version update software. Please pay attention to the news on webpage: http://www.eobdii.fr/wholesale/vag-vehicle-diagnostic-interface-vvdi-644.html.

Q12: When do passat b6 and other car model remind “This function need Condor automatic cutting machine authorize)”.
A12: That mean you need to buy the authorization .

vag-vehicle-diagnostic-interface-vvdi-eobdtoolfr-4

VVDI Function Showsvag-vehicle-diagnostic-interface-vvdi-eobdtoolfr-5