Monthly Archives: October 2015

iKeycutter CONDOR XC-MINI Master V2.0.2 Update Steps

iKeycutter CONDOR XC-MINI Master V2.0.2 Update Steps

iKeycutter CONDOR XC-MINI Master V2.0.2 Update Tool Download

Download the update tool fron the link bellow first. The initial password is 123456.

Steps to update iKeycutter CONDOR XC-MINI:
1. Connect iKeycutter CONDOR XC-MINI Master to the PC with a USB cable.
2. Turn on the iKeycutter CONDOR XC-MINI Master.
3. Click “Update online” button to start update.
4. The screen will appear “Updating” prompt.
5. Wait for the update completed.

ikeycutter-condor-xc-mini-master

Notes:
A: Do NOT turn off PC or unplug USB cable duing updating.
B: Data downloading and firmware upgrading may take a while, please be patient.
C: If the update fails, turn off anti-virus software and then try again.

Tacho Pro 2008 July PLUS Universal Dash Programmer Odometer Correction on Citroen Model Xsara

Tacho Pro 2008 July PLUS Universal Dash Programmer Odometer Correction on Citroen Model Xsara

Preparation:
Tacho Pro 2008 July PLUS Universal Dash Programmer
Use this board and clip:

tacho-pro-u2008-citroen

Operation Steps:

• Remove the cluster and open it.
• Remove the motors carefully from the circuit board. Do not pull off the needles!!!
• Look for the 8 pin chip 93C46.
• Look for the silver chrystal and join its contacts.
• Connect the clip to Port 1.
• Put the clip on the chip 93C46 (red on pin 1).
• Select the menu: Citroen-Xsara
• The Tacho Universal shows you the old value.
• Select the menu Adjust KM.
• Enter the new value.
• Verify the new value with OK.

How to slove the Cummins Inline 5 Insite 7.62 software expired?

How to slove the Cummins Inline 5 Insite 7.62 software expired?

Cummins Inline 5 Insite is a PC-based software application that provides quick and easy access to your engine’s electronic performance information, which enables faster service turn around times.

Question: Hi, Shelly. My Cummins Inline 5 Insite 7.62 prompts software expired problem. It asked for update. How can I do?

commins-inline-5-inside-software-expired
Answer: Please set the computer date to be 2015.1.1. If the Cummins Inline 5 Insite 7.62 still ask for the activate. Send the ID for activate. (Attention: If the Cummins Inline 5 prompts expired after using many days, do this again.)

V8/X6 VS Korea MIRACLE A7 VS iKeycutter CONDOR XC-MINI Key Cutting Machine!

V8/X6 VS Korea MIRACLE A7 VS iKeycutter CONDOR XC-MINI Key Cutting Machine!

When choosing one key cutting machine, many customers want to know the basic functions and the information. Today you can see three different key cutting machine.

Item Number SL257 SL260 SL273
Title V8/X6 Key Cutting Machine Korea MIRACLE A7 iKeycutter CONDOR XC-MINI
Update NO NO YES,Online Update
Language English English Portuguese/Spanish/French
/Germany/Russian/Czech/
Arabic/Turkish/Dutch/Polish
/Bulgarian/Norway/Slovakia
/Italian/English/Chinese
Car list Acura, AlfaRomeo, Audi, BMW,
Buick, Cadillac, Chevrolet,
Chrysler, Citroen, Daihatsu,
Dodge, Ducati, Ferrari, Fiat,
Ford, GCC, GMC, GreatWall,
Holden, Honda, Hummer,
Hyundai, Infiniti, Iveco, Jaguar,
Jeep, Kia, Lancia, LandRover,
LDV, Lexus, Lincoln, MAN,
Mazda, Mercedes, Mercury,
Mini, Mitsubishi, Nissan, Opel,
Peugeot, Piaggio, Porsche, Proton,
Renault, Rover, Saab, Scania,
Seat, Skoda, Ssangyong, Subaru,
Suzuki, Toyota, Vauxhall,
Volkswagen, Volvo…
Same Same
Way of Key Cutting
1 Directly put key information
2 Copy key
3 Measuring key
Same Same
Applied Voltage No limited No limited No limited
If Original Copy Copy Original in China
Which one is best ?
CONDOR XC-MINI(SL273) is mini version of CONDOR XC-007.They all support online update.
CONDOR XC-007 cannot connect with computer when you cut key,only when update you have to connect computer.
While Korea MIRACLE A7(sl260), V8/X6(sl257) can connect with computer when cut key.

 

SVDI PSA ABRITES Commander V5.8 For Peugeot and Citroen Special Function: Read Security Code

SVDI PSA ABRITES Commander V5.8 For Peugeot and Citroen Special Function: Read Security Code

SVDI PSA ABRITES Commander For Peugeot and Citroen is new arrival dealer level tool for Peugeot and Citroen. You can use the SVDI PSA ABRITES Commander to take place of the FVDI PSA. Now, we show you the security code reading function.

The appropriate special function is opened by selecting it from the list box and double-clicking on it, or by selecting it and then pressing the “Open” button.

Security Code (PIN) is 4 symbols code that is requested for Key learning and vehicle configuration modifications. In order to start this special function, click on “Read Security Code” icon in special functions section.
After Read Security Code dialog is opened, select the vehicle and the unit. If you’re not sure which is the car model or there are errors retrieving the PIN – set it to “< AUTO DETECT >”. If you’re not sure about the unit or there are errors while retrieving the PIN leave it to “< AUTO DETECT >”.

svdi-psa-abrites-commander-security-code-1
Click on the Read button and wait until the operation finish.

svdi-psa-abrites-commander-security-code-2

Note that PIN search always starts with checking the PIN reading capabilities that may take up to 15 minutes. Some BSIs require some additional specific operations to be performed – this is “Working on BSI” phase – up to 5 minutes. At the end the following message should appear:

svdi-psa-abrites-commander-security-code-3

Click OK to see the PIN code in the field Security Code:

svdi-psa-abrites-commander-security-code-4

How to solve the failure activation of the MB SD Connect Compact 4?

How to solve the failure activation of the MB SD Connect Compact 4?

Q: Hello, I have got my MB SD STAR C4. But when I installed the software and got the activate data, the HDD showed an error. Can you help me ?

mb-sd-c4-1

A: This error mainly caused by two reasons:
One, you do not run the license on your computer. Two, your computer can not save the activate information. Please follow the picture to get into the STAR UTILITIES like the picture  mb-sd-c4-2, then find the DAS ID to us to activate. If you do not know, please check the picture.

mb-sd-c4-3

If you still have problem of activation, send email to sales@eobdii.fr. MB SD Connect Compact 4 information:  http://www.eobdii.fr/wholesale/mb-sd-connect-compact-4-wireless-star-diagnosis.html.

Best Choice for the WINDOWS 10: VPECKER Easydiag Wireless OBDII Full Diagnostic Tool!

Best Choice for the WINDOWS 10: VPECKER Easydiag Wireless OBDII Full Diagnostic Tool!

5 Highlights to Buy VPECKER Easydiag:
1. Supporting 25 languages, including Chinese (Simplified), English, Chinese (Traditional), Japanese, German, Russian, French, Italian, Spanish, Portuguese, Polish, Turkish, Dutch, Hungarian, Korean, Czech, Arabic, Indonesian and so on.
2. Support online update.
3. Support Wifi.
4. Two Years Warranty.
5. The genuine Windows XP~10 operating systems allows for more stable performances, better compatibility and expandability.

Function Feature for the VPECKER Easydiag:

1. Extensive vehicle coverage for more than 70 US domestic, European, Asian, Australian and Chinese vehicles makes.
2. Complete function capability including live data, ECU programming and so many others.
3. Unparalleled OBDII functionalities-support ALL 5 OBDII protocols and ALL 10 test modes.
4. Can work stably in high and low temperature environment, and work well.
5. Extremely easy-to-use with touch-screen operation and intuitive operation in the windows.
6. Hardware architecture uses a new design with multiple protection, interference and stability. Built-in overvoltage protection module is applied, in order to protect scanner and vehicle against accidental damage during checking.

Software Display for the VPECKER Easydiag:

vpecker-easydiag-obdii-full-diagnostic-tool-languagevpecker-easydiag-obdii-full-diagnostic-tool-software-3vpecker-easydiag-obdii-full-diagnostic-tool-software-4

Car Software for VPECKER Easydiag:

vpecker-easydiag-obdii-full-diagnostic-tool-software-1vpecker-easydiag-obdii-full-diagnostic-tool-software-2

How to use “Key Database” of iKeycutter CONDOR XC-MINI Master?

How to use “Key Database” of iKeycutter CONDOR XC-MINI Master?
User need to supply the key code, then can cutting the key.

ikeycutter-condor-xc-mini-master-key-database-1

Procedure:
1) Enter the Main interface of iKeycutter CONDOR XC-MINI Master, Click on Key Database.

ikeycutter-condor-xc-mini-master-key-database-2
2) Choose the Car Brand, Click on Confirm.

ikeycutter-condor-xc-mini-master-key-database-3
3) Enter the key code. Click on Confirm.

ikeycutter-condor-xc-mini-master-key-database-4
4) Enter the key serial code. Then click on Confirm.

ikeycutter-condor-xc-mini-master-key-database-5
5) The Bitting Code will be found in the database, and it will be shown on the screen, Click on Cut to start.
More information about the iKeycutter CONDOR XC-MINI Masterhttp://www.eobdii.fr/wholesale/ikeycutter-condor-xc-mini-master-automatic-key-cutting-machine.html